Thesis (MScEng (Electrical and Electronic Engineering))--University of Stellenbosch, 2006. / This thesis investigates the compensation of voltage flicker in an industrial environment. Industrial
loads draw progressively less sinusoidal currents. These currents cause non-sinusoidal voltage
drop over the line impedance, causing a distorted line voltage. The light output of incandescent
electric lighting systems is quadratically proportional to the line voltage, and thus variations in the
line voltage cause irritating variations in the output of such systems.
Two tools to analyse flicker problems are developed: A USB data logger is built to log measured
waveforms to computer hard disk. These data are analysed using a MATLAB implementation of the
IEC-specified flicker meter.
A converter-based flicker compensator is found to be the only compensator capable of
compensating general flicker loads. Such a compensator is developed using the synchronous
reference frame filtering technique. Several aspects of the compensator are dealt with in detail
including selection of a current control strategy, calculation and implementation of the converter
duty cycles and compensation of the various non-idealities in such a controller.
Full compensation is contrasted to reactive compensation – the second option being less
expensive but also less effective in the compensation of certain loads. The effectiveness of reactive
compensation is found to be dependent not only on the type of load, but also on the type of line
feeding the flicker load.
Three industrial flicker loads are measured and analysed: a three-phase welder, a sawmill and a
rock crusher. These loads are simulated, and the compensation proposed confirmed via these
simulations. The compensation of the three-phase welder is tested using a hardware scale model.
This verified the operation of the proposed flicker compensator in practice.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:sun/oai:scholar.sun.ac.za:10019.1/1994 |
| Date | 03 1900 |
| Creators | De Wit, Leon |
| Contributors | Mouton, H. du T., University of Stellenbosch. Faculty of Engineering. Dept. of Electrical and Electronic Engineering. |
| Publisher | Stellenbosch : University of Stellenbosch |
| Source Sets | South African National ETD Portal |
| Detected Language | English |
| Type | Thesis |
| Format | 2275355 bytes, application/pdf |
| Rights | University of Stellenbosch |
Page generated in 0.0022 seconds