This research is carried out to better understand the nature of the rock mass and to have a better anticipation of rock fragmentation before blasting the rock mass. Current practices of assessing rock mass usually involve techniques that focus on the surface or outcrop of the rock mass such as scanline surveys, window surveys, photogrammetry and laser scanning etc. These techniques generally lack the ability of providing sufficient information about the rock mass as well as bear various inherent constraints such as safety issues, time requirements, user biasness, equipment requirements and reproducibility of results. Similarly, the rock fragmentation is predicted using different mathematical equations known as fragmentation models. However, these models ignore some key factors that significantly affect the nature of fragmentation such as chargeability of blastholes, drilling information e.g. borehole deviation and require numerous rock parameters which are not well known in most cases. These models are often site-specific and are mostly developed for surface mines. Therefore, their application in underground mining is not so common. The aim of this research is to investigate the possibility of eliminating the constraints and supporting the current practices of rock mass assessment and rock fragmentation prediction. In this regard, drill monitoring technique has been selected as a potential tool for analysing the rock mass and forecast the rock fragmentation. To test the selected technique, measurement while drilling (MWD) data was collected from three different mines. The variations in MWD data were analysed to identify different zones and structures present inside the rock mass. The results were compared to 3D images obtained by close-range terrestrial digital photogrammetry for validation, which showed a close agreement with each other. Similarly, MWD data was used to classify the rock mass into five different classes i.e. solid, slightly fractured, highly fractured, having cavities, and major cavities in a sublevel caving operation. The loading operation of the blasted rock was filmed and digital images of LHD buckets containing blasted rock were extracted from the video recordings. The blasted rock inside the buckets were categorized as fine, medium, coarse and oversize fragmentation based on their median fragment size (X50). A statistical analysis was carried out to see the correlation between MWD based rock mass classes and fragmentation classes. The results showed that fine and medium size fragmentation has better correlation and can be predicted with higher accuracy using MWD data as compared to coarse and oversize fragmentation. The results suggest that the drill monitoring technique has the potential to assess rock mass as well as predict rock fragmentation to some extent. It can be used to differentiate between a weak or strong rock mass or between a fractured or competent rock mass. It can be used to differentiate between joints, cavities or foliations etc. It can also be used to predict finer and medium size fractions of the blasted rock with reasonable accuracy. However, the coarser and oversize fragmentation didn’t have a reliable correlation with MWD data. The potential of using drill monitoring technique for rock mass assessment and rock fragment prediction can be further explored and validated using other established rock mass and fragmentation assessment techniques. It can largely overcome the time, cost and safety constraints associated with the methods already in practice.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:ltu-80806 |
Date | January 2020 |
Creators | Manzoor, Sohail |
Publisher | Luleå tekniska universitet, Geoteknologi, Luleå |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Licentiate thesis, comprehensive summary, info:eu-repo/semantics/masterThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Relation | Licentiate thesis / Luleå University of Technology, 1402-1757 |
Page generated in 0.0011 seconds