Return to search

Printed electronics : Implementation of WORM memory in a RF-antitheft system

<p>Current printable memory technology are not suited for mass produc‐tion. With new inexpensive printed memory, it will be possible to manufacture cheap surveillance tags that are capable to tell the user if something has happened within a timeline. This project is within the ITC FrameProgram 7 founded project PriMeBits. The goal is to imple‐ment a write once read many memory (WORM) onto an RF‐tag together with a sensor that can sense wetness, which can be detected by EAS antitheft systems. Pre researches have been done in the fields printed capacitance, coils and WORMs, all printed with silver ink. Before implementation of a WORM onto a tag simulations and laboratory tests with adjustable resistances were made. Two different circuit models are simulated and tested. When connected to a tag and the WORM is un‐programmed, the EAS system should not trigger an alarm. But if the WORM is programmed by the sensor, the alarm should trigger. Results show that capacitances and WORMs are printable with this technique but coils are not due to high inner resistance. The simulations show that a tag built as an LCCR‐circuit is the best choice. This is also confirmed with tests done with real resistors. With WORMs connected to a tag the results show that approximately 70% of them work as intended, this is because the WORMs as of now are not completely developed. The conclusion of this project is that it is possible to implement a WORM onto a tag with further research, to make an inexpensive surveillance tag.</p> / PriMeBits

Identiferoai:union.ndltd.org:UPSALLA/oai:DiVA.org:miun-11644
Date January 2009
CreatorsHammarling, Krister
PublisherMid Sweden University, Department of Information Technology and Media
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeStudent thesis, text

Page generated in 0.0017 seconds