Return to search

Alternative ignition systems for CNG in diesel applications

Ignition and combustion enhancement of lean homogeneous mixtures offers the potential to simultaneously lower pollutant emissions and improve the thermal efficiency of internal combustion engines. A single cylinder, high compression ratio (16.5:1), open chamber diesel engine has been converted to operate on homogenously charged compressed natural gas (CNG) with the aim of minimising pollutant emissions such as oxides of nitrogen, particulate matter and carbon dioxide. Three ignition systems were tested to examine how effectively they could ignite lean mixtures of CNG with the ultimate aim of achieving simultaneously high thermal efficiency and low oxides of nitrogen emissions. The ignition systems examined were spark ignition (SI), diesel pilot ignition (DPI) and hydrogen assisted jet ignition (HAJI). Irrespective of ignition system used, the efficiency of the engine operating on CNG was significantly reduced at part load compared to diesel. This was predominantly due to a greater amount of unburnt hydrocarbons, higher cycle-by-cycle variability, slow and partial burns and increased heat transfer to the walls. DPI and HAJI systems were able to extend the lean limit to lambda 2.7 and 3.3 respectively, however this did not result in efficiency gains over SI systems. HAJI proved to be superior to DPI with higher peak efficiency, lower carbon dioxide, carbon monoxide and particulates, and significantly lower oxides of nitrogen in the absence of a locally rich ignition source. (For complete abstract open document)

Identiferoai:union.ndltd.org:ADTP/245251
Date January 2003
CreatorsZakis, George
Source SetsAustraliasian Digital Theses Program
LanguageEnglish
Detected LanguageEnglish
RightsTerms and Conditions: Copyright in works deposited in the University of Melbourne Eprints Repository (UMER) is retained by the copyright owner. The work may not be altered without permission from the copyright owner. Readers may only, download, print, and save electronic copies of whole works for their own personal non-commercial use. Any use that exceeds these limits requires permission from the copyright owner. Attribution is essential when quoting or paraphrasing from these works., Open Access

Page generated in 0.0081 seconds