The objective of this study is to model material removal with cutting tool in the case of the machining of Titanium alloy (Ti-6Al-4V) and to bring a multi-physic comprehension of chip formation and the tool/workpiece interaction by adopting finite element approaches and methodologies. For that, the present contribution begins by a macroscopic modeling of the orthogonal cutting process. The cut material behavior considered is supposed based on JC law. Moreover, in order to simulate properly the chip genesis, the material fracture energy concept is adopted for controlling the material damage evolution. This allows capturing the shear strain localization and consequently the chip segmentation for a given set of cutting parameters. The frictional contact model considers the influence of temperature on the limiting shear stress at the tool/chip interface. As a result, this reliable model has the capability to simulate the cutting process even with high coefficient of friction and with large cutting edge radius. The parametric study carried out by referring to this model shows a very interesting corroboration with experimental results. In a second step, the present research work presents a material microstructure-level cutting model (MML cutting model) for cutting simulation. The crystal plasticity theory is adopted for modeling the cutting of the Titanium alloy Ti-6Al-4V in orthogonal case. In this model, the grains of the studied material are explicitly considered, and their orientation angles and slip system strength anisotropy are considered as the main source of the microstructure heterogeneity in the cutting material. To simulate the material degradation process, the continuum intra-granular damage and discrete cohesive zone inter-granular damage models are developed, wherein the zero thickness cohesive elements are implemented to simulate the bond between grain interfaces. The material model is validated by a comparison of compression tests from literature. Finally, simulation results demonstrate the possibility to capture the influence of the microstructure on the material removal in terms of chip formation. It is demonstrated that the grain orientation angle plays an important role for the chip segmentation and its periodicity during the cutting process. This certainly can affect the evolution of the cutting force. Additionally, the surface integrity is discussed based on the MML cutting model for different cutting speeds and feed rates. Indeed, a parametric study shows that the surface integrity is seriously affected by the machining parameters, and the affected region is limited within three layer grains for the present MML cutting model.
| Identifer | oai:union.ndltd.org:CCSD/oai:tel.archives-ouvertes.fr:tel-00708761 |
| Date | 29 September 2011 |
| Creators | Zhang, Yancheng |
| Publisher | INSA de Lyon |
| Source Sets | CCSD theses-EN-ligne, France |
| Language | English |
| Detected Language | English |
| Type | PhD thesis |
Page generated in 0.0022 seconds