Return to search

Time-Resolved Kelvin Probe Force Microscopy of Nanostructured Devices

Since its inception a quarter of a century ago, Kelvin probe force microscopy (KPFM) has enabled studying contact potential differences (CPDs) on the nanometre scale. However, current KPFM investigations are limited by the bandwidth of its constituent electronic loops to the millisecond regime. To overcome this limitation, pump-probe-driven Kelvin probe force microscopy (pp-KPFM) is introduced that exploits the non-linear electric interaction between tip and sample. The time resolution surpasses the electronic bandwidth and is limited by the length of the probe pulse. In this work, probe pulse lengths as small as 4.5 ns have been realized.

These probe pulses can be synchronized to any kind of pump pulses. The first system investigated with pp-KPFM is an electrically-driven organic field-effect transistor (OFET). Here, charge carrier propagation in the OFET channel upon switching the drain-source voltage is directly observed and compared to simulations based on a transmission line model. Varying the charge carrier density reveals the impeding influence of Schottky barriers on the maximum switching frequency.

The second system is an optically-modulated silicon homojunction. Here, the speed of surface photovoltage (SPV) build-up is accessed and compared to timeaveraged results. Due to slow trap states, the time-averaged method is found to lack comprehensiveness. In contrast, pp-KPFM exposes two intensity-dependent recombination times on the same timescale — high-level Shockley-Read-Hall recombination in the bulk and heat-dominated recombination in the surface layer — and a delay of the SPV decay with rising frequency, which is attributed to charge carrier retention at nanocrystals.

The third system is a DCV5T-Me:C60 bulk heterojunction. The SPV dynamics is probed and compared to measurements via open-circuit corrected transient charge carrier extraction by linearly increasing voltage. Both methods reveal an exponential onset of the band bending reduction that is attributed to the charge carrier diffusion time in DCV5T-Me, and a double exponential decay, hinting at different recombination paths in the studied organic solar cell.

The above-mentioned experiments demonstrate that pp-KPFM surpasses conventional KPFM when it comes to extracting dynamic device parameters such as charge carrier retention and recombination times, and prove that pp-KPFM is a versatile and reliable tool for studying electrodynamics on nanosurfaces.

Identiferoai:union.ndltd.org:DRESDEN/oai:qucosa:de:qucosa:30326
Date07 July 2016
CreatorsMurawski, Jan
ContributorsEng, Lukas M., Lüssem, Björn, Technische Universität Dresden
Source SetsHochschulschriftenserver (HSSS) der SLUB Dresden
LanguageEnglish
Detected LanguageEnglish
Typedoc-type:doctoralThesis, info:eu-repo/semantics/doctoralThesis, doc-type:Text
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0032 seconds