The contamination of foods with hydrocarbon mixtures migrating from food contact materials (FCM) was first observed for jute and sisal bags treated with batching oil in the 1990s. Since the millennium, the focus has shifted to printing inks and recycled cardboard packaging as most recognized sources for hydrocarbon contamination from FCM. Mineral oil containing printing inks can either release hydrocarbons directly from the printing of folding boxes into food or indirectly entering the recycling chain of cardboard material by printed products, such as newspapers.
The contamination of dry foods with mineral oil hydrocarbons (MOH) from recycled fiber packaging has been reported to reach up to 100 mg/kg [1]. Using LC-GC-FID technique the MOH were categorized into mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH). The molecular mass, which is assumed to be toxicological relevant, is derived from the GC retention times of accumulated MOSH in human tissues and is limited to n C16 to n-C35 [2]. MOSH is the most significant contaminant of the human body reaching 1-10 g per person, which is of particular concern since a formation of microgranulomas (causing inflammatory reactions) in the liver was observed in rats fed with saturated hydrocarbons [3]. Furthermore, some MOAH are assumed to be genotoxic analogous to polycyclic aromatic hydrocarbons [3]. In the latest draft of a German ‘Mineral Oil Regulation’ the following limits for the migration of MOH from recycled fiber are proposed: for MOSH C16-20 4.0 mg/kg, MOSH C21-35 2.0 mg/kg and for MOAH 0.5 mg per kg food [4].
Functional barriers reducing the migration of undesirable compounds from recycled cardboards (such as MOH and other contaminants) could be a part of the solution for this issue. Supporting that approach in this study, the boxes of recycled cardboard featuring a barrier layer on the internal surface or an integrated adsorbent available early in 2014 were investigated for their efficiency in reducing migration of mineral oil hydrocarbons into dry food. A practice-oriented one-year storage test was performed with wheat flakes in seven configurations: a box of virgin fibers, two boxes of unprotected recycled cardboard, three cardboards with barrier layers (a flexo-printed polyacrylate layer, a polyvinyl alcohol coating and a multilayer involving polyester) and a cardboard containing activated carbon. The highest migration of MOH (C16-24) was observed in the boxes of unprotected recycled cardboard (MOSH: 11.4 mg/kg, MOAH: 2.4 mg/kg). Of the three investigated barrier layers only two reduced migration of MOH into food below the limits of the 3rd draft of the German mineral oil ordinance (2014) until the end of shelf life. The cardboard box involving active carbon as adsorbent prevented detectable migration of mineral oil hydrocarbons (<0.1 mg/kg). In the case of virgin fiber, which was virtually free of MOH (<1 mg/kg), migration close to the proposed limits was detected (C16-24, MOSH: 1.5 mg/kg, MOAH: 0.4 mg/kg). Therefore, it has been proven that the transport box (corrugated board) substantially contributed to the transfer of MOH into food.
Plastic FCM can also release hydrocarbons, such as polyolefin oligomeric hydrocarbons (POH), into food. These POH are of synthetic nature and are formed during the polymerization process of polyolefins (150 – 3000 mg/kg in granulates of homo/hetero polymers involving ethylene and propylene). This group of synthetic contaminants contain also saturated hydrocarbons (POSH) analogous to mineral oils, but contrary no aromatic hydrocarbons. Further, a significant amount (10 – 50%) of monounsaturated hydrocarbons (POMH) was determined in the oligomeric fraction of polyolefins, which are not detectable in mineral oil products. Therefore, these POMH can be used as a marker for POH migration. A method based on two-dimensional high performance liquid chromatography on-line coupled to gas chromatography (on-line HPLC-HPLC-GC) was developed to enable the separate analysis of saturated, monounsaturated and aromatic hydrocarbons in extracts of packaging materials like polyolefins or paperboard and foods, repectively. It is an extension of the HPLC-GC method for MOSH and MOAH [1] using an additional argentation HPLC column, since normal-phase HPLC on silica gel did not preseparate saturated from monounsaturated hydrocarbons. Further, this method and comprehensive two-dimensional GC (GCxGC) was used to investigate the concentration of different oligomer types in polypropylene (PP) and polyethylene (PE) based sealing layers as well as their corresponding granulates. The analyzed sealing layers contained 180-995 mg/kg POSH and 90-435 mg/kg POMH (C16-35). Only in sealing layers involving low-density PE, oxidized polyolefin oligomers as well as cyclic oligomers (alkylated cyclopentanes and hexanes) have been detected. The transfer of POH (C16-35) from the investigated sealing layers into food can be substantial (>50%) and can reach more than 2 mg per kg food. The level of contamination depends on the oligomer content of the sealing layer, the fat content of the food, the processing temperature and the surface-volume ratio.
Hot melt adhesives are widely utilized to glue cardboard boxes used as food packaging material. The analysed raw materials of hot melts mainly consisted of paraffinic waxes, hydrocarbon resins and polyolefins. The hydrocarbon resins, functioning as tackifiers, were the predominant source of hydrocarbons of sufficient volatility to migrate via gaseous phase into dry foods. The 18 hydrocarbon resins analyzed contained 8.2-118 g/kg saturated and up to 59 g/kg aromatic hydrocarbons (C16-24). These synthetic tackfier resins, especially the oligomers ≤C24, have been characterized structurally and migration into food was estimated using a food simulant and by the analysis of real food samples. About 0.5-1.5 % of the potentially migrating substances (C16 24) of a hot melt were found to be transferred into food under storage conditions, which can result in a food contamination of approximately 1 mg/kg food in this case. The order of magnitude depends on the absolute amount of potentially migrating substances from the hot melt, the hot melt surface, contact time, amount and type of foods.
| Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa:de:qucosa:30807 |
| Date | 19 October 2017 |
| Creators | Lommatzsch, Martin |
| Contributors | Simat, Thomas, Moret, Sabrina, Technische Universität Dresden |
| Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
| Language | English |
| Detected Language | English |
| Type | doc-type:doctoralThesis, info:eu-repo/semantics/doctoralThesis, doc-type:Text |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0026 seconds