Return to search

Relação entre atributos físicos, químicos, mineralógicos e capacidade de suporte de carga de solos do Rio Grande do Sul / Relation between physical, chemical and mineralogical attributes and soil load bearing capacity of Rio Grande do Sul

Há poucos estudos sobre a influência da mineralogia no comportamento do solo em relação aos atributos de resistência física. Neste sentido, o estudo tem como hipótese que independentemente do potencial matricial de água no solo a composição mineralógica da fração argila interfere na pressão de préconsolidação, modificando a capacidade de suporte de carga dos solos. Assim, objetivou-se caracterizar a composição mineralógica de classes de solos representativas no Rio Grande do Sul; Determinar parâmetros físico-mecânicos dos solos; E estabelecer correlações entre parâmetros físico-mecânicos com mineralógicos melhorando o entendimento da capacidade de suporte de carga. Para tal, foram selecionados sete solos de duas classes de solos; três Argissolos e quatro Latossolos. As amostras deformadas e indeformadas foram coletadas sob vegetação natural na camada de 10 a 15 cm de profundidade. Na fração TFSA, foram realizadas análises físicas (granulometria e área superficial específica), químicas (carbono orgânico total, teor de óxidos de ferro pedogênicos e óxidos de baixa cristalinidade) e mineralógicas (difratometria de raio x e refletância difusa). Nas amostras indeformadas foram realizadas as análises de permeabilidade ao ar e o ensaio de compressão uniaxial. Os dados foram analisados por correlações de Pearson. Os solos avaliados possuem a caulinita como principal mineral da fração argila, no entanto diferenças com relação aos óxidos de ferro foram encontradas, os quais correlacionaram com a pressão de pré-consolidação. A hematita influenciou positivamente sobre a pressão de pré-consolidação à 100 kPa, assim, dependendo do potencial matricial de água no solo. / There are few studies on the influence of mineralogy on the ground behavior in relation to physical resilience attributes. The is study has hypothesized that regardless of the matric potential of soil water the mineralogical composition of the clay fraction interferes with the pre-consolidation pressure by modifying the soil bearing capacity. Therefore, this study aimed to characterize the mineralogical composition of representative soil classes in Rio Grande do Sul; determine physical-mechanical parameters of the soil; and establish correlations between physico-mechanical parameters mineralogical improving the understanding of the load-bearing capacity. To this end, it was selected seven soils of two soil classes; three Ultisols and four Oxisols. The disturbed and undisturbed samples were collected under natural vegetation in the layer from 10 to 15 cm deep. In TFSA fraction, physical analyzes were performed (particle size and specific surface area), chemical (total organic carbon content of pedogenic iron oxides and low crystallinity oxides) and mineralogical (x ray diffraction and diffuse reflectance). In undisturbed soil samples were carried out air permeability tests and uniaxial compression test. Data were analyzed by Pearson correlations. The evaluated soils have kaolinite as the main mineral of the clay fraction, however differences with respect to iron oxides were found, which correlated with the pressure of pre-consolidation. The hematite had a positive effect on the pre-consolidation pressure of 100 kPa, thus depending on the matric potential of soil water.

Identiferoai:union.ndltd.org:IBICT/oai:www.lume.ufrgs.br:10183/180107
Date January 2016
CreatorsSantos, Tatiele Fruett dos
ContributorsInda Junior, Alberto Vasconcellos, Mazurana, Michael
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguagePortuguese
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis
Formatapplication/pdf
Sourcereponame:Biblioteca Digital de Teses e Dissertações da UFRGS, instname:Universidade Federal do Rio Grande do Sul, instacron:UFRGS
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0022 seconds