Return to search

Produção de goma xantana utilizando casca de soja como substrato em cultivo submerso e cultivo semi-sólido / Xanthan gum production using soybean hull substrate by submerged and solid-state cultnations

A goma xantana continua sendo o polissacarídeo microbiano mais produzido no mundo. Características como aumento da viscosidade em soluções, agente de geleificação, estabilidade frente aos diversos tratamentos despertam um interesse especial para a indústria de alimentos, porém, a aplicação para fins não alimentícios vem crescendo significativamente, como é o caso da indústria petrolífera e têxtil. A utilização de substratos alternativos e baratos para a produção de biomoléculas de interesse comercial, como resíduos agroindústrias, vem sendo alvo de virias pesquisas na atualidade. Sendo assim, neste trabalho, produzimos goma xantana utilizando a casca de soja como substrato para a Xanthomonas campestris. Utilizou-se um planejamento experimental e da metodologia de superfície de resposta a fim de identificar as melhores condições de produção de goma xantana em cultivo semi-sólido em biorreatores estáticos (CSSE). As melhores condições para este cultivo foram: temperatura de 31.2ºC, aeração de 467.5 L.min-1 e densidade óptica do inóculo de 0,929 em 600 nm. Em paralelo, conduziu-se um estudo da produção de goma xantana em cultivo submerso (CSm) e em cultivo semi-sólido agitado (CSSA), fazendo-se um comparativo entre os três sistemas quanto à produção e a viscosidade do exopolissacarídeo. Quanto à conversão de casca de soja em goma, o CSSA foi o que mais converteu, chegando a 19%, seguido de 10% no CS e 8% no SSE. A viscosidade da goma em solução chegou a 1550 cP na taxa de cisalhamento de 1 s-1 para SSA. A utilização da casca de soja como substrato e suporte de crescimento microbiano, mostrou-se adequado nessas condições. / The xanthan gum is still the most produced microbial polysaccharide in the world. Characteristics as the increase of viscosity in solutions, geleificant agent, stability in several treatments, bnng a special interest for the food industry, however, the application for non-food applications has been increasing significantly, as the case of the textile and petroleum industry. The utilization of an alternative and non-expensive substrate for the biomolecules production of commercial interest, as agro-industry residues, has been the aim of some researches nowadays. Thus, in this work, we produce xanthan gum using soybean hull as substrate for the Xanthomonas campestris. An experimental factorial design and response surface methodology was used in order to identify the best conditions of production of xanthan gum in solid-state cultivation in static bioreactors (SSSC). The best conditions for this cultivation were temperature of 3 1.2ºC, aeration of 467.5 L.min-1 and optic density of inoculum of 0,929 in 600 nm. At the same time, a study of the production of xanthan gum in submerged cultivation (SmC) and solid-state agitated cultivation (ASSC) has been conducted, comparing the three systems in relation to the production and the viscosity of the exopolysaccharide. In relation to the conversion of the soybean hull into gum, the SSA was the one with the highest rate of conversion, reaching 19%, followed by 10% in CS and 8% in the SSS. The viscosity of the gurn in solution reached 1550 cP in the shear rate of 1 s-1 for SSA. The use of the soybean hull as substrate and support of microbial growth has shown adequate in these conditions.

Identiferoai:union.ndltd.org:IBICT/oai:www.lume.ufrgs.br:10183/28629
Date January 2008
CreatorsVarela, Willian José
ContributorsHertz, Plinho Francisco, Heck, Júlio Xandro
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis
Formatapplication/pdf
Sourcereponame:Biblioteca Digital de Teses e Dissertações da UFRGS, instname:Universidade Federal do Rio Grande do Sul, instacron:UFRGS
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0017 seconds