Return to search

Remoção de metais pesados de efluentes sintéticos aquosos por nanofiltração / Heavy metal removal from aqueous synthetic wastewater by nanofiltration

O objetivo deste trabalho foi estudar a remoção de metais pesados de efluentes sintéticos aquosos através de nanofiltração, com utilização de membrana de poliamida. A membrana utilizada constituída de poliamida apresentou uma boa permeabilidade hidráulica, constatada pela linearidade de fluxo com a variação de pressão de trabalho. Os metais estudados foram cobre, cádmio, zinco, chumbo e níquel com especiação de nitrato e sulfato. O desempenho do sistema foi verificado pela variação dos parâmetros operacionais (pressão e fluxo), associados também com a variação da salinidade e da concentração do metal. Em uma etapa inicial estudou-se a remoção de metais (nitrato e sulfato) isoladamente em uma mesma concentração molar, na pressão de 10 bar, comparando-se as rejeições com e sem agente complexante (EDTA). Em uma segunda etapa, estudou-se o desempenho da membrana, com misturas dos metais (nitrato) e mistura de metais (sulfato), também com e sem agente complexante, os resultados mostraram que a presença de agente complexante melhorou a rejeição dos metais. Nestas misturas estudaram-se os efeitos das concentrações (0,001; 0,0005 e 0,0001mol/L) e das pressões (5; 7; 10 e 12,5 bar) no sistema de remoção, constatou-se que o aumento da concentração e diminuição da pressão afeta a remoção. Em uma terceira etapa, estudou-se a influência da salinidade pela mistura de dois metais de mesma especiação (sulfato), comparando a remoção na pressão de 10 bar. Os resultados atestaram uma rejeição maior que 94 % para todos metais, na pressão de 10 bar, indicando um excelente desempenho e fluxo adequado, daí viabilidade de processo para todas as concentrações testadas. A pertinência do teste se justifica pela adequação do permeado ao atendimento aos padrões ambientais de concentração de metais e confirmam a eficácia do sistema de nanofiltração na remoção de metais pesados / The objective of this work was to study the removal of heavy metals of aqueous synthetic efluentes through nanofiltração, with use of polyamide membrane. The membrane used constituted of polyamide it presented a good hydraulic permeabilidade, verified by the flow linearidade with the variation of work pressure. The studied metals were copper, cadmium, zinc, lead and nickel with speciation of nitrate and sulfate. The performance of the system was verified by the variation of the operational parameters (pressure and flow), also associated with the variation of the salinity and of the concentration of the metal. In an initial stage it was studied the removal of metals (nitrate and sulfate) separately in a same concentration molar, in the pressure of 10 bar, being compared the rejections with and without agent complexante (EDTA). In a second stage, it was studied the performance of the membrane, with mixtures of the metals (nitrate) and mixture of metals (sulfate), also with and without agent complexante, the results showed that the presence of agent complexante improved the rejection of the metals. In these mixtures they were studied the effects of the concentrations (0,001; 0,0005 and 0,0001mol/L) and of the pressures (5; 7; 10 and 12,5 bar) in the removal system, it was verified that the increase of the concentration and decrease of the pressure affects the removal. In a third stage, it was studied the influence of the salinity by the mixture of two metals of same speciation (sulfate), comparing the removal in the pressure of 10 bar. The results attested a larger rejection than 94% for all metals, in the pressure of 10 bar, indicating an excellent acting and appropriate flow, then process viability for all of the tested concentrations. The importance of the test is justified for the adaptation of the permeated to the service to the environmental patterns of concentration of metals and they confirm the effectiveness of the nanofiltração system in the removal of heavy metals

Identiferoai:union.ndltd.org:IBICT/urn:repox.ist.utl.pt:BDTD_UERJ:oai:www.bdtd.uerj.br:1500
Date31 March 2011
CreatorsClaudio Manoel Guimarães da Costa
ContributorsFábio Merçon, Fernando Benedicto Mainier, Marcio Luis Lyra Paredes
PublisherUniversidade do Estado do Rio de Janeiro, Programa de Pós-Graduação em Química, UERJ, BR
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguagePortuguese
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis
Formatapplication/pdf
Sourcereponame:Biblioteca Digital de Teses e Dissertações da UERJ, instname:Universidade do Estado do Rio de Janeiro, instacron:UERJ
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0034 seconds