Return to search

Superplastic Deformation Behaviour Of AZ31 Magnesium Alloy

Superplastic deformation behaviour of AZ31 magnesium alloy having initial grain sizes 8, 11 and 17μm alloy was investigated at 673 K with initial strain rates ranging from 1x10-2 to 1x10-4 s-1. Mechanical data on fine grained AZ31 alloy with grain sizes 8 and 11 μm indicated a transition in deformation mechanisms. The strain rate sensitivity, m ~ 0.5 at low strain rates and m ~ 0.2 at high strain rates which suggest GBS and dislocation slip as the corresponding deformation mechanism. For coarse grained alloy having grain size 17 μm, m < 0.4 at low strain rates and ~ 0.2 at high strain rates, suggesting dislocation slip as the deformation mechanism. A superplastic maximum elongation of ~ 475% was observed for 8 μm alloy at low rate of deformation. At high strain rates, the deformation was non-superplastic for fine and coarse grained alloys. The contribution of GBS to total strain, ξ in the low strain rate regime was evaluated to be 50 – 60%, for both low and high elongation. EBSD studies indicated the maintenance of high fraction of high angle boundaries up to true strain of ~ 0.88 and a reduction in texture intensity. These observations show GBS as the dominant deformation mechanism for fine grained alloy. At higher strain rate, ξ was estimated to be 30%. Fraction of high angle boundaries was reduced and [0001] direction of grains was found to be rotated towards the tensile direction, suggesting dislocation slip. Based on mechanical data, flow localization and cavitation studies; the failure of the material during high rates of deformation was mainly due to flow localization. Extensive cavitation along with more uniform flow at a lower strain rate regime suggests the failure due to the cavity interlinkage and coalescence. The present GBS data are consistent with the previous relevant data in fine grained Mg based alloys in the low strain rate regime. The GBS data obtained in the dislocation regime in the present study are also in agreement with that of the previous investigations in fine grained Mg alloys.

  1. http://hdl.handle.net/2005/521
Identiferoai:union.ndltd.org:IISc/oai:etd.ncsi.iisc.ernet.in:2005/521
Date08 1900
CreatorsPanicker, Radhakrishna M R
ContributorsChokshi, Atul H
Source SetsIndia Institute of Science
Languageen_US
Detected LanguageEnglish
TypeThesis
RelationG21656

Page generated in 0.0027 seconds