Homogeneous Charge Compression Ignition (HCCI) operation is desirable for its high thermal efficiency and low emissions of NOx and particulates. Difficulty with cold starting and maximum achievable speed/load highlight the desire for mode-switching to traditional spark ignition (SI) operation.
Mode-switching between SI and HCCI is investigated using only actuation of throttle, CNG injector pulse width, and CNG injection timing on a single cylinder CFR engine. Open-loop control achieves a one cycle mode-switch between two adjustable IMEP levels. Sequences are repeatable as demonstrated by 10 mode-switches with the same inputs. Performance is evaluated using a developed mode-switch performance criterion (MSPC) by considering duration between steady-states of operation, smoothness of IMEP, and knock based on maximum rate of pressure rise. Comparing the results with subjective analysis (the current standard) reveals good correlation. Throughout development, mode-switching performance is shown to improve by a factor of 60.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:AEU.10048/1825 |
| Date | 06 1900 |
| Creators | Boddez, Jason Bradley |
| Contributors | Checkel, M. David (Mechanical Engineering), Koch, C. Robert (Mechanical Engineering), Checkel, M. David (Mechanical Engineering), Koch, C. Robert (Mechanical Engineering), Olfert, Jason (Mechanical Engineering), Hayes, Robert E. (Chemical and Materials Engineering) |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | en_US |
| Detected Language | English |
| Type | Thesis |
| Format | 4202335 bytes, application/pdf |
Page generated in 0.0025 seconds