Return to search

SPH Modeling of Solitary Waves and Resulting Hydrodynamic Forces on Vertical and Sloping Walls

Currently, the accurate prediction of the impact of an extreme wave on infrastructure located near shore is difficult to assess. There is a lack of established methods to accurately quantify these impacts. Extreme waves, such as tsunamis generate, through breaking, extremely powerful hydraulic bores that impact and significantly damage coastal structures and buildings located close to the shoreline. The damage induced by such hydraulic bores is often due to structural failure. Examples of devastating coastal disasters are the 2004 Indian Ocean Tsunami, 2005 Hurricane Katrina and most recently, the 2011 Tohoku Japan Tsunami. As a result, more advanced research is needed to estimate the magnitude of forces exerted on structures by such bores.
This research presents results of a numerical model based on the Smoothed Particle Hydrodynamics (SPH) method which is used to simulate the impact of extreme hydrodynamic forces on shore protection walls. Typically, fluids are modeled numerically based on a Lagrangian approach, an Eulerian approach or a combination of the two. Many of the common problems that arise from using more traditional techniques can be avoided through the use of SPH-based models. Such challenges include the model computational efficiency in terms of complexity of implementation. The SPH method allows water particles to be individually modeled, each with their own characteristics, which then accurately depicts the behavior and properties of the flow field. An open source code, known as SPHysics, was used to run the simulations presented in this thesis. Several cases analysed consist of hydraulic bores impacting a flat vertical wall as well as a sloping seawall. The analysis includes comparisons of the numerical results with published experimental data. The model is shown to accurately reproduce the formation of solitary waves as well as their propagation and breaking. The impacting bore profiles as well as the resulting pressures are also efficiently simulated using the model.

Identiferoai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OOU.#10393/23778
Date04 February 2013
CreatorsEl-Solh, Safinaz
Source SetsLibrary and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada
LanguageEnglish
Detected LanguageEnglish
TypeThèse / Thesis

Page generated in 0.0025 seconds