Microtruss cellular materials have large internal surface areas and small cross-sectional strut dimensions, permitting surface modification to substantially enhance their mechanical performance. For instance, a ~400% increase in compressive strength with virtually no weight penalty can be induced by a hard anodized Al2O3 ceramic coating of only ~50 µm thickness. The present study seeks the optimal architecture of these composites by exploring three research challenges: architecture and degree of forming are interdependent due to stretch-forming, architecture and the material properties are interdependent due to work-hardening, and ceramic structural coatings add design complexity. Theoretical predictions and architectural optimizations demonstrated a potential weight reduction of ~3% to ~60% through the increase of internal truss angle for both annealed and work-hardened microtruss cores. While further validation is needed, experimental evidence in this study suggested the collapse in ceramic-aluminum microtruss composites could be considered as a mixture of composite strut global buckling and oxide local shell buckling mechanisms.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OTU.1807/33600 |
| Date | 27 November 2012 |
| Creators | Yu, Hiu Ming (Bosco) |
| Contributors | Hibbard, Glenn D. |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | en_ca |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0019 seconds