The hemp plant is an attractive source of raw material for multiple products.
Processing hemp requires the separation of fibre and core components of the
plant. Peel tests were conducted for hemp stems to evaluate the strength required
to peel fibre from the core. The average peeling force for the Alyssa variety was
0.39 N and that for the USO-14 variety was 0.87 N. The Ising model was
implemented to produce a stochast ic model. The simulated peel test behaved
similarly to the experimental peel test. A discrete element model (DEM) of a
planetary ball mill was developed to predict the energy requirement of grinding
hemp for fibre. Hemp grinding tests were performed on variety USO-31 using a
planetary ball mill for model calibration purposes. Power draw measurements
increased linearly increasing at greater grinding speeds. The DEM approximated
power draw with relative error below 10% for grinding speeds below 400 rpm.
| Identifer | oai:union.ndltd.org:MANITOBA/oai:mspace.lib.umanitoba.ca:1993/14169 |
| Date | 20 December 2012 |
| Creators | Guzman Quinonez, Leno Jose |
| Contributors | Chen, Ying (Biosystems Engineering) Zhong, Wen (Textile Sciences), Potter, Simon (Biosystems Engineering) Mashiur, Rahman (Textile Sciences) |
| Source Sets | University of Manitoba Canada |
| Detected Language | English |
Page generated in 0.0023 seconds