1 |
Schwank und Artushof : Komik unter Bedigungen höfischer Interaktion in der "Crone" des Heinrich von dem Türlin /Gutwald, Thomas, January 2000 (has links)
Texte remanié de: Diss.--philosophische Fakultät für Sprach- und Literaturwissenschaft II--München--Ludwig-Maximilians-Universität, 1999. / Bibliogr. p. 339-357. Index.
|
2 |
Das Ideal des irrenden Lesers : ein Wegweiser durch die "Krone" Heinrichs von dem Türlin /Vollmann, Justin. January 1900 (has links)
Texte remanié de: Dissertation--Philosophisch-Historische Fakultät--Basel--Universität, 2007. / Bibliogr. p. 231-263. Index.
|
3 |
Kommentar zur "Crône" Heinrichs von dem Türlin /Felder, Gudrun. January 1900 (has links)
Texte remanié de: Dissertation--Neuphilologische Fakultät--Tübingen--Eberhard Karls Universität, 2005. / Bibliogr. p. 736-788.
|
4 |
Urlaub auf dem Bauernhof : Erlebnisse aus dem Blickwinkel der Wissenschaft /Kaiser, Isabel. January 2009 (has links)
Fachhochsch., Diplomarbeit--Bremen, 2008.
|
5 |
Modeling of energy requirements for fiber peeling and mechanical processing of hempGuzman Quinonez, Leno Jose 20 December 2012 (has links)
The hemp plant is an attractive source of raw material for multiple products.
Processing hemp requires the separation of fibre and core components of the
plant. Peel tests were conducted for hemp stems to evaluate the strength required
to peel fibre from the core. The average peeling force for the Alyssa variety was
0.39 N and that for the USO-14 variety was 0.87 N. The Ising model was
implemented to produce a stochast ic model. The simulated peel test behaved
similarly to the experimental peel test. A discrete element model (DEM) of a
planetary ball mill was developed to predict the energy requirement of grinding
hemp for fibre. Hemp grinding tests were performed on variety USO-31 using a
planetary ball mill for model calibration purposes. Power draw measurements
increased linearly increasing at greater grinding speeds. The DEM approximated
power draw with relative error below 10% for grinding speeds below 400 rpm.
|
6 |
Modeling of energy requirements for fiber peeling and mechanical processing of hempGuzman Quinonez, Leno Jose 20 December 2012 (has links)
The hemp plant is an attractive source of raw material for multiple products.
Processing hemp requires the separation of fibre and core components of the
plant. Peel tests were conducted for hemp stems to evaluate the strength required
to peel fibre from the core. The average peeling force for the Alyssa variety was
0.39 N and that for the USO-14 variety was 0.87 N. The Ising model was
implemented to produce a stochast ic model. The simulated peel test behaved
similarly to the experimental peel test. A discrete element model (DEM) of a
planetary ball mill was developed to predict the energy requirement of grinding
hemp for fibre. Hemp grinding tests were performed on variety USO-31 using a
planetary ball mill for model calibration purposes. Power draw measurements
increased linearly increasing at greater grinding speeds. The DEM approximated
power draw with relative error below 10% for grinding speeds below 400 rpm.
|
7 |
Die Erzählmotive der "Crône" Heinrichs von dem Türlin und ihre altfranzösische Quellen : ein kommentiertes Register /Zach, Christine. January 1990 (has links)
Texte remanié de: Diss.--Geisteswissenschaftliche Fakultät--Universität Wien, 1987.
|
8 |
Geophysical Analysis of a Central Florida Karst Terrain using Light Detection and Ranging (LIDAR) and Ground Penetrating Radar (GPR) Derived SurfacesMontane, Juana Maria 27 July 2001 (has links)
Airborne LIDAR (Light Detecting and Ranging) is a relatively new technique that rapidly and accurately measures micro-topographic features. This study compares topography derived from LIDAR with subsurface karst structures mapped in 3-dimensions with ground penetrating radar (GPR). Over 500 km of LIDAR data were collected in 1995 by the NASA ATM instrument. The LIDAR data was processed and analyzed to identify closed depressions. A GPR survey was then conducted at a 200 by 600 m site to determine if the target features are associated with buried karst structures. The GPR survey resolved two major depressions in the top of a clay rich layer at ~10m depth. These features are interpreted as buried dolines and are associated spatially with subtle (< 1m) trough-like depressions in the topography resolved from the LIDAR data. This suggests that airborne LIDAR may be a useful tool for indirectly detecting subsurface features associated with sinkhole hazard.
|
9 |
Evaluation of High-resolution Digital Elevation Models For Creating Inundation MapsWonkovich, Mark A. 05 January 2007 (has links)
No description available.
|
10 |
Simulation of High-velocity Penetration for Rigid Projectile into Plain Concrete Target using Discrete Element MethodZhou, Yu 20 March 2009 (has links)
Penetration of high velocity is of concern for both civilian and military research for decades, and computerized simulation is the scholar's focus in recent years. This study presents a study on the Discrete Element Method (DEM) simulation of plain concrete target's behavior under high-velocity penetration of rigid projectile.
In this thesis, different types of research works including empirical, analytical and numerical methods in penetration by the previous scholars were carefully reviewed. A DEM-based concrete model was established by using software PFC3D. The major micro-variables of the simulation program were calibrated according to the required macro-mechanical parameters. Meanwhile, their correlations within the concrete range were studied, with the sensitivity analysis and the corresponding regression equations.
With the established digital concrete model, penetration simulation tests were carried out. The results of penetration depth versus impact velocity were compared with the experimental and empirical calculated results from Forrestal's work in 1994. A good agreement was obtained. Some other simulation studies, like projectile mass, geometry, penetrating acceleration, concrete response stress, strain, and strain-rate were also conducted to study the constitutive properties in this thesis. / Master of Science
|
Page generated in 0.0403 seconds