A three dimensional sampling technique was used to compare field understory conditions in Southeastern Louisiana using a laser range finder at three height levels (0.5m, 1.0m, and 1.5m) to LiDAR generated understory conditions to determine if a relationship existed. A similar comparison was made between densitometer crown closure measurements and understory LiDAR vegetation counts. A comparison between overstory LiDAR counts and understory LiDAR counts was also performed. LiDAR and understory counts exhibited a significant linear relationship but were poorly correlated at each sample level (Level-1 R2 = 0.34 ? 0.38, Level-2 R2 = 0.36 ? 0.43). The Level-3 LiDAR slope coefficient was non-significant. The crown closure versus understory linear model did not produce any significant results. The overstory LiDAR versus understory LiDAR model produced a moderate correlation (R2 = 0.5226) and was significant. The process of relating LiDAR points to understory conditions was not repeatable, even in the same geographic region.
| Identifer | oai:union.ndltd.org:MSSTATE/oai:scholarsjunction.msstate.edu:td-1517 |
| Date | 05 May 2007 |
| Creators | Clarkson, Matthew Thomas |
| Publisher | Scholars Junction |
| Source Sets | Mississippi State University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Theses and Dissertations |
Page generated in 0.0019 seconds