Return to search

Laterally loaded wood compression members : finite element and reliability analysis

This thesis consists of two parts. The first part describes the analysis and implementation of a finite element computer model for the general prediction of failure of wood members in bending or in combined bending and axial compression. Both instability and material strength failures are included. The program is verified using available analytical and test results. A good agreement with the results predicted by this program is observed.
The second part describes a procedure for the structural reliability evaluation of a compression member assuming random loads and material variables. The program developed here for the reliability study links the finite element program and the Rackwitz-Fiessler algorithm for the calculation of the reliability index β. The gradient of the failure function, which is a necessary input to the Rackwitz-Fiessler algorithm, is computed numerically using the finite element routine. The results of the reliability study for a typical column problem are compared against the available results obtained by following the code procedures [as outlined in CAN3-086.1-M84 (1984)] for different slenderness ratios.
A performance factor ɸ⍴ = 0.75, for compression members of any length is recommended in order to obtain a more accurate and consistent level of reliability in the design process. It is estimated that if this factor ɸ⍴ = 0.75 adopted in the current design practices, a level reliability index of the order of 4.0 can be achieved. / Applied Science, Faculty of / Civil Engineering, Department of / Graduate
Date January 1987
CreatorsKoka, Exaud Noe
PublisherUniversity of British Columbia
Source SetsUniversity of British Columbia
Detected LanguageEnglish
TypeText, Thesis/Dissertation
RightsFor non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use

Page generated in 0.0022 seconds