Laser powder bed fusion is an additive manufacturing technique that is capable of building metallic parts by spreading many layers of metal powder over a build surface and using a laser to melt specific sections of the surface. The part is built by melting consecutive layers on top of each other until the design is completed. However, during this process defects can occur. These defects have impacts on the part’s physical properties, and it is important to detect them for quality assurance. A single part takes several hundred or thousands of layers to build. While each layer is built, cameras and sensors are used to create images of each layer. These images are used for identification and classification of defects that could have a negative impact on a printed part’s physical properties, such as tensile strength. Classification of defects would reduce manual inspection of the printed part. Thus, the classification of defects in each layer must be automated, as it would be infeasible to manually classify each layer. Recently, machine learning have proven to be an effective method for automating defect classification in laser powder bed fusion. However, machine learning and especially deep-learning approaches generally require a large amount of labeled training data, which is typically not available for laser powder bed fusion printed parts. Labeling of images requires manual labor and domain knowledge. One of the greatest obstacles in defect classification, is how machine learning can be applied despite this absence of labeled data. A machine learning approach that show potential for being trained with less data, is the siamese neural network approach. In this thesis, a novel approach for automating defect classification is developed, using layer images from a laser powder bed fusion printing process. In order to cope with the limited access to labeled data, the classifiers are based on the siamese neural network structure. Two siamese neural network structures are developed, a one-shot classifier, which directly classifies the instance, and a hierarchical classifier with a hierarchical classification process according to the hierarchy of the defect classes. The classifiers are evaluated by inferring a test set of images collected from the laser powder bed fusion process. The one-shot classifier is able to classify the images with an accuracy of 70%and the hierarchical classifier with an accuracy of 86%. For the hierarchical classifier area of the ROC curves were calculated to be, 0.96 and 0.95 for the normal vs defect and overheating vs spattering stages respectively. Unlabeled images were added to the training set of a new instance of the hierarchical classifier, which could infer the test set without any major changes to test set accuracy.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kau-90949 |
| Date | January 2022 |
| Creators | Göransson, Anton |
| Publisher | Karlstads universitet, Institutionen för matematik och datavetenskap (from 2013), Karlstads universitet, Avdelningen för datavetenskap, Karlstad Universitet |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf, application/pdf |
| Rights | info:eu-repo/semantics/openAccess, info:eu-repo/semantics/openAccess |
Page generated in 0.0172 seconds