The Tubed Mega Frame is a new structure concept for high-rise buildings which is developed by Tyréns. In order to study the structural performance as well as the efficiency of this new concept, a global analysis of the Tubed Mega Frame structure is performed using finite element analysis software ETABS. Besides, the lateral loads that should be applied on the structure according to different codes are also studied. From the design code study for wind loads and seismic design response spectrums, it can be seen that the calculation philosophies are different from code to code. The wind loads are approximately the same while the design response spectrums vary a lot from different codes. In the ETABS program, a 3D finite element model is built and analyzed for linear static, geometric non-linearity (P-Delta) and linear dynamic cases. The results from the analysis in the given scope show that the Tubed Mega Frame structural system is potentially feasible and has relatively high lateral stiffness and global stability. For the service limit state, the maximum story drift ratio is within the limitation of 1/400 and the maximum story acceleration is 0.011m/sec 2 which fulfill the comfort criteria.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-147382 |
| Date | January 2014 |
| Creators | Zhang, Han |
| Publisher | KTH, Betongbyggnad |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | TRITA-BKN-Examensarbete, 1103-4297 ; 426 |
Page generated in 0.1 seconds