Return to search

Driver model for a software in the loop simulation tool / En förarmodell för ”software in the loop” simuleringsverktyg

For this project, a Software-In-the-Loop (SIL) simulation tool is used at Scania (“VTAB” – Virtual Truck and Bus), which simulates the submodels of the mechanical vehicle components together with the real control units. The simulation tool contains the following submodels: Engine model, Drivetrain model, Drive cycle model, Restbus model, and Driver model. The simulated human driver submodel in the restbus model outputs two pedal control signals to the control unit, namely the gas and brake pedals. With these two pedal signals, the control unit decides the modes of mechanical vehicle components. This driver model needs to be reworked to obtain a better velocity following performance. Two controllers, fuzzy PI anti-windup and backward calculation, are implemented in the driver model and compared by the velocity tracking accuracy and the pedal switching frequency. In the comparison and analysis section, two different cycles and two weights of payload are simulated. The simulation results demonstrate that both controllers can improve the driver model’s velocity tracing accuracy. Further, the fuzzy PI anti-windup controller is better when considering pedal signals fluctuation frequency and implementation complexity. / För detta projekt används ett simuleringsverktyg Software-In-the-Loop (SIL) på Scania (“VTAB” - Virtual Truck and Bus), vilket simulerar submodellerna för de mekaniska fordonskomponenterna tillsammans med de verkliga styrenheterna. Simuleringsverktyget innehåller följande submodeller: Motormodell, Drivmotormodell, Drivcykelmodell, Restbusmodell och Drivermodell. Den simulerade submodellen för mänsklig förare i restbussmodellen kommer att sända två pedalsstyrsignaler till styrenheten, nämligen gas och broms. Med dessa två pedalsignaler kan styrenheten avgöra lägen av mekaniska fordonskomponenter. Denna drivrutinmodell måste omarbetas för att få en bättre hastighetsspårnings presentationsförmåga. Två styrenheter, fuzzy PI anti-windup och bakåtberäkning, implementeras i förarmodell och jämförs respektive med hastighetsspårningsnoggrannhet och pedalväxelfrekvens. I jämförelseoch analysavsnittet simuleras två olika cyklar och två nyttolast. Simuleringsresultaten visar att båda kontrollerna kan förbättra förarmodellens hastighetsspårningskapacitet. Vidare är fuzzy PI-anti-windup-kontroller bättre när man tar hänsyn till pedalsignalernas fluktueringsfrekvens och implementeringskomplexitet

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-265668
Date January 2019
CreatorsZheng, Yue
PublisherKTH, Skolan för industriell teknik och management (ITM)
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess
RelationTRITA-ITM-EX ; 2019:663

Page generated in 0.0018 seconds