Time to digital converter (TDC) is a digital unit that measures the time interval between two events.This is useful to determine the characteristics and patterns of a signal or an event. In this thesis ahybrid TDC is presented consisting of a tapped delay line and a clock counter principle. The TDC is used to measure the time between received data in a QKD application. If the measuredtime does not exceed a certain value then data had been sent without any interception. It is alsopossible to use TDCs in other fields such as laser-ranging and time-of-flight applications. The TDC consists of two carry chains, an encoder, a FIFO and a counter for each channel, anAXI-module and a control unit to generate command signals to all channels that are implemented.The time is measured by sampling the signal that has propagated through the carry chain and from thissample encode the propagation length. In this thesis a TDC is implemented that has a 10 ns dead time and a resolution below 28 psin a four channel mode. The propagation variation is approximately two percent of the total valueduring testing. For the implementation an FPGA-board with a Zynq XC7Z020 SoC is used withSystemVerilog that is a hardware describing language (HDL).
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-134424 |
| Date | January 2015 |
| Creators | Andersson Holmström, Simon |
| Publisher | Linköpings universitet, Datorteknik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0026 seconds