Return to search

Sura dryckers påverkan på biaxial böjhållfasthet på litiumdisilkatbaserad glaskeram med olika ytor / Biaxial flexural strength on lithium disilicate based glass ceramic with different surface submerged in acidic beverages

Aim: The aim of this study is to investigate if biaxial flexural strength for pressed glass ceramic with glazed, polished and grinded surface is affected by the acidic beverages Coca Cola and red wine. Material and method: 63 specimens were manufactured in IPS e.max Press®, divided into 6 test groups and one control group (KG) with 9 specimens in each group, in the dimensions 12 mm in diameter and in thickness, 1,8 mm without notch and 2,2 mm with notch. The specimens subdivided by different surface treatments; glazed surface (CCG, RVG), polished surface (CCP, RVP) and ground surface (CCS, RVS). Three groups underwent thermocycling for 970 cycles in 8°C Coca Cola® and three groups red wine at room temperature. Results: The results show significant difference between the groups with α=0,001. Biaxial flexural strength test showed that the CCS group had the highest mean value (340 MPa) and CCP the lowest mean value (214 MPa). CCS showed significant differences to all groups except RVP and RVS. Furthermore the RVP group showed no significant difference to any other group and RVS only towards CCP. Conclusion: Within the limitations of this in vitro study the following conclusions can be made; Acidic beverages do not affect the flexural strength for pressed lithium disilicate based glass ceramics. The flexural strength is affected by surface treatment, where grinding with sandpaper results in higher flexural strength. / Syfte: Syftet med föreliggande studie är att undersöka om den biaxiala böjhållfastheten på litiumdisilikatbaserad glaskeram som framställts genom pressteknik med tre olika ytbehandlingar (glansbränd yta eller för att efterlikna ocklusal inslipning eller abraderat slitage) påverkas av de sura dryckerna Coca Cola® och rödvin.Material och metod: 63 provkroppar tillverkades av IPS e.max Press®. Provkropparna delades in i 6 testgrupper, och en kontrollgrupp (KG), á 9 i varje, med måtten 12 mm i diameter och tjocklek 1,8 mm utan notch och 2,2 mm med notch. Provkropparna delades in utifrån olika ytbehandlingar, glansbränd (CCG, RVG), polerad (CCP, RVP) och slipad med sandpapper (CCS, RVS). 3 grupper genomgick termocykling i 970 cykler i 8°C Coca Cola®, och 3 grupper i rödvin i rumstemperatur, varvat med destillerat vatten i 37°C. Därefter utfördes biaxialt böjhållfasthetstest och resultaten analyserades med One-way ANOVA, Tukey’s test, signifikansnivå α= 0,05.Resultat: Resultaten visar att det finns signifikant skillnad mellan grupperna α=0,001. Det biaxiala böjhållfasthetstestet påvisade att gruppen CCS hade högst medelvärde (340 MPa) och CCP hade lägst medelvärde (214 MPa). CCS visade signifikant skillnad jämfört med samtliga grupper, förutom RVP och RVS. Vidare uppvisade RVP ingen signifikant skillnad jämfört med någon av de övriga grupperna och RVS endast mot CCP.Slutsats: Inom denna in vitro-studies begränsningar kan följande slutsatser dras; Sura drycker påverkar inte böjhållfastheten på litiumdisilikatbaserad glaskeram som framställts genom pressteknik. Hållfastheten påverkas beroende på ytbehandling. Genom att slipa ytan med slippapper resulterade det i högre biaxial böjhållfasthet.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:mau-42753
Date January 2021
CreatorsBromé, Nathalie, Jonung, Lina
PublisherMalmö universitet, Odontologiska fakulteten (OD)
Source SetsDiVA Archive at Upsalla University
LanguageSwedish
Detected LanguageSwedish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0024 seconds