This thesis aims to design a cabinet to house some of the required hardware to realize a 1000 A IGBT inverter controlled static excitation system. In the thesis practical design considerations are identified and solved. The suggested excitation system requires a cabinet to house the inverters. Together with inverter requirements stated by the inverter manufacturer and possible electromagnetic interference from switching of the IGBT:s, practical design considerations arise when realizing the system. Identified design considerations are heat dissipation, EMI, IP-code requirements and mechanical stresses at inverter connections. In this study, the design considerations are addressed and a cabinet design with required components inside is suggested. The suggested cabinet together with its components could fulfil the suggested system's- and the inverter's requirements. However, the IP-code allowed by the suggested EMC-seals might be lower than the IP54 required by the inverter. The cabinets EMC-properties will probably be lowered if regular rubber gaskets are used. The study suggests one possible configuration which is possible to realize. It is suggested that further consideration is dedicated to the EMI reducing properties of the cabinet if it is to be installed in an environment sensitive to EMI.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:uu-324193 |
| Date | January 2017 |
| Creators | Frisk, Johan |
| Publisher | Uppsala universitet, Elektricitetslära |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | UPTEC ES, 1650-8300 ; 17 017 |
Page generated in 0.0027 seconds