Return to search

Validation of the MOPITT-A instrument through radiative transfer modelling and laboratory calibration

This thesis presents the characterization and calibration of the MOPITT-A instrument which uses the technique of correlation spectroscopy to ensure carbon monoxide in the atmosphere. A
theoretical model is developed for the instrument and compared to MOPITT-A measurements collected under controlled laboratory conditions, which were designed to emulate atmospheric signals. It
is shown that the model and measurements are in very good agreement with each other and that the MOPITT-A instrument behaves as expected. It was found that the gain of the instrument varies with
time. The cause of the gain variation is not known but it is suggested that frosting inside the detector nest would be consistent with the observed nature of the variation.

Identiferoai:union.ndltd.org:USASK/oai:usask.ca:etd-08302007-121805
Date31 August 2007
CreatorsLamont, Kirk
ContributorsManson, Alan, Llewellyn, Edward J., Koustov, Alexandre V. (Sasha), Degenstein, Douglas A., Chen, Li, Bradley, Michael P., Sofko, George J.
PublisherUniversity of Saskatchewan
Source SetsUniversity of Saskatchewan Library
LanguageEnglish
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://library.usask.ca/theses/available/etd-08302007-121805/
Rightsunrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to University of Saskatchewan or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report.

Page generated in 0.0014 seconds