Textured SnO2 films as TCO have been investigated to determine the effect of surface roughness on the performance of CdS/CdTe solar cells. Film roughness was controlled by varying the substrate temperature. Characterization of the SnO2 films has also carried out using AFM measurements. It was found that increase in substrate temperature results in increased roughness of the film.
A series of cells were fabricated with different CdS thicknesses to determine the combined effect of SnO2 roughness and CdS thickness. As a part of fabrication process, cells were subjected to different post deposition treatments. It was observed that roughness seems to be critical when CdS remained in the final device is thin. The performance of CdS/CdTe devices fabricated was characterized using J-V and spectral response measurements. It was found that cells with initial CdS thickness of 1000 showed better performance than those with thicker CdS for the same roughness of SnO2.
Conversion efficiency of 13.37% was achieved by increasing the SnO2 roughness and depositing thicker CdS initially.
| Identifer | oai:union.ndltd.org:USF/oai:scholarcommons.usf.edu:etd-1789 |
| Date | 21 March 2005 |
| Creators | Nemani, Lingeshwar |
| Publisher | Scholar Commons |
| Source Sets | University of South Flordia |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Graduate Theses and Dissertations |
| Rights | default |
Page generated in 0.0018 seconds