During the last two decades, environmental awareness and climate change concerns have encouraged and supported the implementation of recycled techniques in the Transportation Infrastructure Industry for rehabilitating and constructing pavements in the United States. Besides that, pavement roads are public goods that bring economic and social benefits to all countries. Therefore, assessing the pavement structural condition is essential to understand the performance of new materials and determine actions for conservation, maintenance, or rehabilitation. In-situ Pavement monitoring through embedded instrumentation is a type of monitoring technique, which uses several sensors installed within the pavement to obtain the structural responses used in Mechanical-Empirical design to control the performance and define asset management plans. This thesis presents the instrumented response of a Recycled Pavement Section on the Interstate 64 (located in Virginia, USA) to analyze the actual pavement responses (strain and stress) under real traffic and environmental conditions. Several sensors were installed during the construction (including strain gauges, pressure cells, thermocouples, and TDR probes), and two recycling techniques were used (CCPR and Full Depth Reclamation (FDR)) in this project. The Instrumented Recycled Pavement Section analyzed in this research was tested during five months in 2019 to evaluate the effect of temperature, sensor location, and load configuration on the pavement responses collected in the field.
During the tests, three loaded trucks ran over the instrumented section. The results showed that the pavement structure is working properly, the stress responses decreased with depth, the maximum strain over the months was compared, and the temperature effect was addressed. Nevertheless, the stress and strain data obtained in each test presented a large variability because it is difficult to control the position where the trucks are passing during this type of experiment. Furthermore, the measured strains were useful to develop a calibrated pavement structural model, which showed that the pavement is expected to have a long structural service life. / M.S. / During the last two decades, different Departments of Transportation have been studying the implementation of recycled materials in pavement structure to provide better economic, environmental, and social benefits by addressing environmental challenges within the Transportation Infrastructure Industry.
Among the emerging recycled techniques, Cold-Central Plant Recycling (CCPR) and Full Depth Reclamation (FDR) are included. Both procedures recollect and use the existing asphalt in the rehabilitation or reconstruction of the new pavement structure.
The main benefits of pavement recycled materials include reduction of raw materials required and gas emissions. Nevertheless, recycled techniques are not commonly implemented due to the lack of information about long-term performance under real traffic and environmental conditions.
In addition, since 2004, when the new Pavement Design Guide was released, the evaluation and validation of new materials require the understanding of the interaction between material properties, traffic, and climate.
To address this concern, this thesis analyzed the pavement response measurements obtained in the Interstate 64 Widening Project (Virginia, USA), where two recycling techniques were used (CCPR and FDR). In this project, several sensors were installed during the construction to obtain information regarding the current environment condition (temperature and moisture) and pavement performance (stress and strain).
The recycled pavement section was tested during five months of 2019 and trucks with known load configurations were implemented in the field tests. The results showed that the pavement structure is properly working, there is an acceptable stress distribution within the pavement layers, and the overall thickness is expected to have a long structural service life. Besides that, measured strain values obtained through the field experiment were compared with the theoretical ones obtained with computational tools.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/108251 |
| Date | January 2021 |
| Creators | Benavides Ruiz, Carolina |
| Contributors | Civil and Environmental Engineering, Flintsch, Gerardo W., Katicha, Samer W., Wang, Linbing |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf, application/pdf |
| Rights | Creative Commons Attribution 4.0 International, http://creativecommons.org/licenses/by/4.0/ |
Page generated in 0.005 seconds