abstract: The lifetime of a transformer is essentially determined by the life of its insulation
system which is a time function of the temperature defined by its thermal class. A large
quantity of studies and international standards have been published indicating the
possibility of increasing the thermal class of cellulose based materials when immersed
in natural esters which are superior to traditional mineral oils. Thus, a transformer
having thermally upgraded Kraft paper and natural ester dielectric fluid can be
classified as a high temperature insulation system. Such a transformer can also
operate at temperatures 20C higher than its mineral oil equivalent, holding additional
loading capability without losing life expectancy. This thesis focuses on evaluating
the use of this feature as an additional capability for enhancing the loadability and/or
extending the life of the distribution transformers for the Phoenix based utility - SRP
using FR3 brand natural ester dielectric fluid.
Initially, different transformer design options to use this additional loadability
are compared allowing utilities to select an optimal FR3 filled transformer design
for their application. Yearlong load profiles for SRP distribution transformers, sized
conventionally on peak load demands, are analyzed for their oil temperatures, winding
temperatures and loss of insulation life. It is observed that these load profiles can be
classified into two types: 1) Type-1 profiles with high peak and high average loads,
and 2) Type-2 profiles with comparatively low peak and low average load.
For the Type 1 load profiles, use of FR3 natural ester fluid with the same nominal
rating showed 7.4 times longer life expectation. For the Type 2 load profiles, a new
way of sizing ester filled transformers based on both average and peak load, instead of
only peak load, called “Sustainable Peak Loading” showed smaller size transformers
can handle the same yearly peak loads while maintaining superior insulation lifespan.
It is additionally possible to have reduction in the total energy dissipation over the
year. A net present value cost savings up to US$1200 per transformer quantifying
benefits of the life extension and the total ownership cost savings up to 30% for
sustainable peak loading showed SRP distribution transformers can gain substantial
economic savings when the distribution transformer fleet is replaced with FR3 ester
filled units. / Dissertation/Thesis / Envirotemp FR3 Fluid Brochure / Envirotempe FR3 Fluid Data Sheet / Masters Thesis Electrical Engineering 2018
| Identifer | oai:union.ndltd.org:asu.edu/item:51564 |
| Date | January 2018 |
| Contributors | Vaidya, Chinmay Vishwas (Author), Holbert, Keith (Advisor), Ayyanar, Raja (Committee member), Pal, Anamitra (Committee member), Arizona State University (Publisher) |
| Source Sets | Arizona State University |
| Language | English |
| Detected Language | English |
| Type | Masters Thesis |
| Format | 89 pages |
| Rights | http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0026 seconds