Return to search

Hybrid testing of an aerial refuelling drogue

Hybrid testing is an emerging technique for system emulation that uses a transfer system composed of actuators and sensors to couple physical tests of a critical component or substructure to a numerical simulation of the remainder of a system and its complete operating environment. The realisation of modern real-time hybrid tests for multi-body contact-impact problems often proves infeasible due to (i) hardware with bandwidth limitations and (ii) the unavailability of control schemes that provide satisfactory force and position tracking in the presence of sharp non-linearities or discontinuities. Where this is the case, the possibility of employing a pseudo-dynamic technique remains, enabling tests to be conducted on an enlarged time scale thus relaxing bothbandwidth and response time constraints and providing inherent loop stability. Exploiting the pseudo-dynamic technique, this thesis presents the development of Robotic Pseudo-Dynamic Testing (RPsDT), a dedicated method that specifically targets the realisation of hybrid tests for multi-body contact-impact problems using commercial off- the shelve (COTS) industrial robotic manipulators. The RPsDT method is evaluated in on-ground studies of air-to-air refuelling (AAR) maneuvers with probe-hose-drogue systems where the critical contact and coupling phase is tested pseudo-dynamicallywith full-scale refuelling hardware while the flight regime is emulated in simulation. It is shown that the RPsDT method can faithfully reproduce the dominant contact impact phenomena between probe and drogue while minor discrepancies result from the absence of rate-dependant damping in the force feedback measurements. In combination with full-speed robot controlled contact tests, reliable estimates for impact forces, strain distributions and drogue responses to off-centre hits are obtained providing extensive improvements over current predictive capabilities for the in-flight behaviour of refuelling hardware and it is concluded that the technique shows great promise for industrial applications.

Identiferoai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:761036
Date January 2018
CreatorsBolien, Mario
ContributorsDu Bois, Jonathan ; Iravani, Pejman
PublisherUniversity of Bath
Source SetsEthos UK
Detected LanguageEnglish
TypeElectronic Thesis or Dissertation

Page generated in 0.0021 seconds