This thesis describes a feasibility study into the use of a new method of timber construction developed in New Zealand. This new method combines the use of an engineered wood product (Laminated Veneer Lumber) and post-tensioned ductile connections. Three case study buildings are presented in concrete, steel and timber all representing current design and construction practice. A fourth building, referred to as the “timber plus” structure, is also considered with the addition of timber architectural components.
The case study timber building consists of two lateral resisting systems. In one direction post-tensioned LVL moment resisting frames are used, with post-tensioned cantilever walls in the orthogonal direction. Timber-concrete composite floor units are also used.
The method of design and detailing of the timber building is shown with member sizes being found to be comparable to that of the concrete structure. Sub-assembly testing is performed on some key connections with excellent results. Construction time is evaluated and compared to the concrete structure with similar construction times being achieved. Finally the costs of the case study buildings are calculated and compared. The costing found the four options to be similar in price with the Timber and Timber plus buildings showing only a 6% and 11% increase in total cost respectively.
| Identifer | oai:union.ndltd.org:canterbury.ac.nz/oai:ir.canterbury.ac.nz:10092/2587 |
| Date | January 2008 |
| Creators | Smith, Tobias James |
| Publisher | University of Canterbury. Civil and Natural Resources Engineering |
| Source Sets | University of Canterbury |
| Language | English |
| Detected Language | English |
| Type | Text, Electronic thesis or dissertation |
| Rights | Copyright Tobias James Smith, http://library.canterbury.ac.nz/thesis/etheses_copyright.shtml |
| Relation | NZCU |
Page generated in 0.0018 seconds