This master thesis focuses on the issue of tightness evaluation of gasketed tubesheet in U tube exchangers, which meets strength requirements of ČSN EN 13 445-3 and ČSN EN 1591-1 standards. It deals with the forces acting on the gasket when measuring the effects acting on the entire heat exchanger. A separate part is devoted to the calculation of the heat profile in the heat exchanger and verification of the strength of the heat exchanger. The final part introduces model of a heat exchanger, on which a possible approach to solving the tightness of the tubesheet in heat exchangers is presented. In thesis temperature field evaluation was conducted, the results of which were used in stress strain analysis, in order to obtain gasket contact pressure. Extreme gasket contact pressures were used to estimate leak rate limits.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:442829 |
| Date | January 2021 |
| Creators | Trubač, Daniel |
| Contributors | Pernica, Marek, Létal, Tomáš |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0024 seconds