Return to search

[en] USE OF ELECTRO-LEVELS TO OBTAIN DEFLECTION AND BENDING MOMENT IN CONCRETE FACED ROCKFILL DAMS / [pt] APLICAÇÃO DE ELETRONÍVEIS PARA OBTENÇÃO DAS DEFLEXÕES E DOS MOMENTOS FLETORES NA FACE DE CONCRETO DE BARRAGENS DE ENROCAMENTO

[pt] Este trabalho descreve a montagem, calibração e instalação de 80 (oitenta) eletroníveis na face de concreto da Barragem de Mazar, que consiste em uma Barragem de Enrocamento com Face de Concreto de 166 m de altura localizada na parte sudeste do Equador, no rio Paute. A barragem possui taludes a montante de 1,4(H):1,0(V) e a jusante de 1,5(H):1,0(V), com volume de enrocamento de 5.000.000 m3. Os eletroníveis foram instalados ao longo de quatro seções na face de concreto em diferentes etapas do processo construtivo da barragem, permitindo a observação do comportamento deste elemento de vedação desde o inicio da construção. Para a interpretação foram desenvolvidas rotinas que possibilitaram, além da automatização, a criação de uma interface gráfica para acompanhamento. Os resultados indicaram com precisão os deslocamentos da face e acusaram regiões críticas com relação à atuação de momentos fletores, ratificando a importância do monitoramento da face de concreto desde o início da sua execução. / [en] This thesis describes the procedures involved in the montage, calibration and installation of 80 (eighty) electro-levels on the concrete face of Mazar’s dam, located in the Paute river, southeast of Ecuador. This dam consists of a Concrete Face Rockfill Dam 166m high and it has upstream slopes of 1.4(h):1.0(v) and downstream slopes of 1.5(h):1.0(v). The rockfill volume is 5000000 m3. Electro-levels were installed throughout 4 sections on the concrete face in different phases of the dam construction, allowing the behavior observation of its concrete face since the beginning of the construction. For the interpretation of the results, some routines were developed to allow not only the automation of the process but also the development of graphic interface for following the process. The results indicated with precision the face displacements and showed critical regions related to the bending moment, which confirms the importance of monitoring the concrete face during all the construction stages.

Identiferoai:union.ndltd.org:puc-rio.br/oai:MAXWELL.puc-rio.br:15688
Date31 May 2010
CreatorsDANILO TOLEDO RAMOS
ContributorsPEDRICTO ROCHA FILHO
PublisherMAXWELL
Source SetsPUC Rio
LanguagePortuguese
Detected LanguageEnglish
TypeTEXTO

Page generated in 0.006 seconds