Return to search

[en] INVESTIGATION ON ELECTROLUMINESCENT PROPERTIES OF NOVEL TETRAKIS BETA-DIKETONATE COMPLEXES USED IN OLEDS / [pt] ESTUDO DAS PROPRIEDADES ELETROLUMINESCENTES DE NOVOS COMPLEXOS TETRAKIS BETA-DICETONATOS DE EURÓPIO UTILIZADOS EM OLEDS

[pt] Neste trabalho é apresentado o estudo de três complexos tetrakis betadicetonatos
de európio: Li[Eu(dbm)(4)].(4)H(2)O, TMPip[Eu(dbm)(4)] e Morf[Eu(dbm)(4)].
Todos os compostos foram caracterizados à temperatura ambiente por diversas
técnicas, tais como absorção óptica, fotoluminescência estacionária (PL) e
voltametria cíclica. Já os dispositivos eletroluminescentes orgânicos (OLEDs)
baseados nestes materiais e fabricados por evaporação térmica resistiva foram
caracterizados eletro-opticamente. Os espectros de PL dos compostos
apresentaram as linhas características de emissão das transições (5)D(0)→(7)F(0-3) do
íon európio, e não exibiram bandas relativas à emissão dos ligantes. Porém,
comparações entre os espectros de PL dos materiais na forma de pó e de filme
fino indicaram prováveis mudanças na estrutura dos compostos
TMPip[Eu(dbm)(4)] e Morf[Eu(dbm)(4)]. Uma das possibilidades é a de que a
deposição térmica estaria degradando estes materiais, dando origem às
espécies tris beta-dicetonato. Os OLEDs com complexos de európio atuando
simultaneamente como camada emissora e transportadora de elétrons
apresentaram também, em seus espectros, os picos relativos às transições do
íon Eu(3+). Para aumentar a eficiência luminosa dos dispositivos foi testada uma
nova configuração, acrescentando-se uma camada bloqueadora de buracos e
uma transportadora de elétrons. Esta nova arquitetura aprimorou o
funcionamento dos OLEDs, cuja eletroluminescência (EL) passou a ser visível a
olho nu. Por outro lado, ela causou o aparecimento de uma banda larga centrada
em 480nm no espectro de EL. O estudo realizado para investigar a origem desta
banda mostrou que ela é proveniente da emissão da camada bloqueadora de
buracos. / [en] Rare-earth complexes present extremely sharp line emission making
possible to use them in organic light-emitting devices (OLEDs) technology. This
dissertation reports the study of three europium tetrakis beta-diketonate
complexes: Li[Eu(dbm)(4)].(4)H(2)O, TMPip[Eu(dbm)(4)] and Morf[Eu(dbm)(4)]. UV-Vis
absorption, photoluminescence (PL) and cyclic voltammetry measurements were
used to characterize the complexes, at room temperature. The PL spectra
displayed the characteristic europium narrow bands from (5)D(0)→(7)F(0-3) transitions
and exhibited red color emission, without a contribution from ligand emission.
However, a comparison between thin films spectra and powder spectra
suggested probable changes in the TMPip[Eu(dbm)(4)] e Morf[Eu(dbm)(4)]
complexes composition. One possibility is that the thermal deposition is causing
degradation, breaking the tetrakis structure into tris beta-diketonate complexes.
This hypothesis was investigated using TGA technique associated with FTIR
analysis of chemical species. Europium complexes based OLEDs produced by
thermal evaporation and using different device configuration were characterized
by electroluminescence (EL) measurements. Bilayer OLEDs fabricated with a
europium complex acting simultaneously as the emissive layer and as the
electron transporting layer showed the bands from Eu(3+) transitions in the EL
spectra. Another configuration was used to increase the device efficiency, adding
a hole-blocking layer and an electron transporting layer. This new architecture
improved the OLEDs performance, enabling the electroluminescence to be
visible with the naked eye. On the other hand, it caused the appearance of a wide
emission band centered at 480nm. A study performed about the source of this
emission band showed that it was originated by the hole-blocking layer.

Identiferoai:union.ndltd.org:puc-rio.br/oai:MAXWELL.puc-rio.br:16438
Date07 October 2010
CreatorsKELLY DE CARVALHO TEIXEIRA
ContributorsMARCO CREMONA
PublisherMAXWELL
Source SetsPUC Rio
LanguagePortuguese
Detected LanguagePortuguese
TypeTEXTO

Page generated in 0.0023 seconds