Return to search

[pt] INTERAÇÃO FLUIDOS SINTÉTICOS BASE-ÓLEO E BASE-ÁGUA E FOLHELHOS / [en] SHALE-SYNTHETICS OIL AND WATER FLUIDS INTERACTION

[pt] Este trabalho desenvolve uma metodologia para obter
experimentalmente a pressão capilar de diferentes fluidos
em contato com folhelhos, comparando-a com valores obtidos
analiticamente a partir da caracterização dos fluidos e
dos folhelhos individualmente. Foram realizados ensaios
numa célula de difusão a qual permite simular as condições
de pressão aplicadas no campo, avaliar a interação físico-
química entre fluidos e rochas, além de determinar os
parâmetros de transporte de massa devido a gradientes
químicos e hidráulicos. Verifica-se que os valores de
pressão capilar obtidos diretamente na célula de difusão
são inferiores aos obtidos a partir da equação de pressão
capilar utilizando a tensão interfacial, o ângulo de
contato e o raio de poros do folhelho. Desta forma,
conclui-se que caso seja realizada uma análise de
estabilidade considerando a pressão capilar do fluido,
este parâmetro deve ser determinado experimentalmente na
célula de difusão. Caso contrário, valores superestimados
poderão ser encontrados. / [en] A methodology was developed to experimentally obtain the
capillary pressure of different fluids in contact with
shales and compare these values with analytical results
from individual characterization of fluids and shales.
Tests were carried out in a diffusion cell, which allows
the simulation of in-situ pressure conditions, the
evaluation of physical-chemical interactions between
fluids and rocks and the determination of mass transport
parameters due to hydraulic and chemical gradients. It is
observed that the values of capillary pressure directly
obtained in the diffusion cell are inferior to the ones
obtained from the capillary pressure equation using the
interfacial tension, the contact angle and the pore radius
of shales. Thus, it can be concluded that, if a stability
analysis considering the capillary pressure of the fluid
is carried out, this parameter should be experimentally
determined in the diffusion cell. Otherwise, overestimated
values can be found.

Identiferoai:union.ndltd.org:puc-rio.br/oai:MAXWELL.puc-rio.br:7635
Date02 January 2006
CreatorsCYNTIA SIQUEIRA MUNIZ
ContributorsSERGIO AUGUSTO BARRETO DA FONTOURA
PublisherMAXWELL
Source SetsPUC Rio
LanguagePortuguese
Detected LanguagePortuguese
TypeTEXTO

Page generated in 0.002 seconds