Consumer drones have used both standards such as Wi-Fi as well as proprietary communication protocols, such as DJI's OcuSync. While these methods are well suited to certain flying scenarios, they are limited in range to around 4.3 miles. Government and military unmanned aerial vehicles (UAVs) controlled through satellites allow for a global reach in a low-latency environment. To address the range issue of commercial UAVs, this thesis investigates using standardized cellular technologies for command and control of UAV systems. The thesis is divided into five chapters: Chapter 1 is the introduction to the thesis. Chapter 2 describes the equipment used as well as the test setup. This includes the drone used, the cellular module used, the microcontroller used, and a description of the software written to collect the data. Chapter 3 describes the data collection goals, as well as locations in the sky that were flown in order to gather experimental data. Finally, the results are presented in Chapter 4, which draws limited correlation between the collected data and flight readiness Chapter 5 wraps up the thesis with a conclusion and future areas for research are also presented.
| Identifer | oai:union.ndltd.org:unt.edu/info:ark/67531/metadc1609109 |
| Date | 12 1900 |
| Creators | Gardner, Michael Alan |
| Contributors | Fu, Shengli, Li, Xingrong, Bailey, Colleen |
| Publisher | University of North Texas |
| Source Sets | University of North Texas |
| Language | English |
| Detected Language | English |
| Type | Thesis or Dissertation |
| Format | viii, 69 pages, Text |
| Rights | Public, Gardner, Michael Alan, Copyright, Copyright is held by the author, unless otherwise noted. All rights Reserved. |
Page generated in 0.0017 seconds