Return to search

Θεωρία και εφαρμογές κρυπτογραφικών συστημάτων δημόσιου κλειδιού βασισμένων σε ελλειπτικές καμπύλες / Theory and practice of public key cryptosystems based on elliptic curves

Τα κρυπτογραφικά συστήματα που βασίζονται στις ελλειπτικές καμπύλες, αποτελούν ένα πολύ σημαντικό κομμάτι της κρυπτογραφίας δημόσιου κλειδιού και τα τελευταία χρόνια όλο και περισσότεροι επιστήμονες ασχολούνται με τη μελέτη τους. Το πλεονέκτημα των συστημάτων αυτών σε σχέση με τα συμβατικά κρυπτογραφικά συστήματα (π.χ. RSA) είναι ότι χρησιμοποιούν μικρότερες παραμέτρους και κλειδιά, προσφέροντας τα ίδια επίπεδα ασφάλειας. Για το λόγο αυτό, τα κρυπτογραφικά συστήματα ελλειπτικών καμπυλών προτιμούνται σε συσκευές περιορισμένων πόρων, όπως οι έξυπνες κάρτες (smart cards) και τα κινητά τηλέφωνα. Ένα από τα πιο θεμελιώδη προβλήματα στα κρυπτογραφικά συστήματα ελλειπτικών καμπυλών, είναι η γένεση ελλειπτικών καμπυλών, κατάλληλων να προσφέρουν την ασφάλεια που απαιτείται από τις κρυπτογραφικές εφαρμογές. Η πιο αποδοτική μέθοδος γένεσης ελλειπτικών καμπυλών, ορισμένων πάνω σε πρώτα, πεπερασμένα σώματα, είναι η μέθοδος του Μιγαδικού Πολλαπλασιασμού ή εν συντομία η μέθοδος CM. Η μέθοδος αυτή απαιτεί την εύρεση των ριζών ορισμένων πολυωνύμων, που ονομάζονται πολυώνυμα κλάσεως. Τα πολυώνυμα που χρησιμοποιούνται συνήθως είναι τα πολυώνυμα Hilbert και τα πολυώνυμα Weber. Τα πρώτα μπορούν να χρησιμοποιηθούν άμεσα στη μέθοδο CM, αλλά η κατασκευή τους είναι πολύ χρονοβόρα. Από την άλλη, τα πολυώνυμα Weber κατασκευάζονται πολύ πιο αποδοτικά αλλά δεν μπορούν να χρησιμοποιηθούν άμεσα στη μέθοδο CM. Για να γίνει αυτό, πρέπει οι ρίζες τους να μετασχηματιστούν στις ρίζες των αντίστοιχων πολυωνύμων Hilbert. Η παρούσα διδακτορική διατριβή στοχεύει σε τρεις κύριες κατευθύνσεις. Η πρώτη αφορά στη βελτίωση της απόδοσης της στη μεθόδου CM και στην εισαγωγή σε αυτή των πολυωνύμων Weber. Η δεύτερη, στην κατασκευή ελλειπτικών καμπυλών πρώτης τάξης. Η χρήση αυτών των ελλειπτικών καμπυλών εγγυάται τη σθεναρότητα των συστημάτων που τις χρησιμοποιούν απέναντι σε όλες τις πιθανές επιθέσεις. Η τρίτη αφορά στη δημιουργία μιας βιβλιοθήκης λογισμικού που να μπορεί να χρησιμοποιηθεί σε περιβάλλοντα περιορισμένων πόρων και η οποία να περιλαμβάνει όλους τους αλγορίθμους και τα πρωτόκολλα που απαιτούνται για την κατασκευή ενός ολοκληρωμένου κρυπτογραφικού συστήματος ελλειπτικών καμπυλών. Η πρώτη συνεισφορά της παρούσας διδακτορικής διατριβής αφορά σε μια νέα παραλλαγή της μεθόδου CM, η οποία βασίζεται στα πολυώνυμα Weber. Παρουσιάζεται το σύνολο των μετασχηματισμών των ριζών τους στις ρίζες των αντίστοιχων πολυωνύμων Hilbert και δίνεται ένα θεωρητικό άνω φράγμα για την ακρίβεια που απαιτείται για την κατασκευή τους. Επιπλέον, παρουσιάζεται μια εκτενής πειραματική μελέτη, με την οποία συγκρίνεται η χρήση των πολυωνύμων Hilbert με αυτή των πολυωνύμων Weber στη μέθοδο CM, καταδεικνύοντας τα πλεονεκτήματα των τελευταίων. Πειραματικά αποτελέσματα επίσης, αποδεικνύουν ότι το άνω φράγμα της ακρίβειας κατασκευής των πολυωνύμων Weber που παρουσιάστηκε στη διδακτορική διατριβή, είναι πολύ κοντά στην πραγματική ακρίβεια που απαιτείται για την κατασκευή τους. Η δεύτερη συνεισφορά αφορά στην κατασκευή ελλειπτικών καμπυλών πρώτης τάξης. Στην περίπτωση αυτή, αποδεικνύεται ότι τα πολυώνυμα Weber έχουν τρεις φορές μεγαλύτερο βαθμό από τον βαθμό των αντίστοιχων πολυωνύμων Hilbert, και μάλιστα τα συγκεκριμένα πολυώνυμα δεν έχουν ρίζες στα πρώτα πεπερασμένα σώματα (F_p), αλλά σε μια επέκτασή τους (F_{p^3}). Επιπλέον, παρουσιάζονται οι μετασχηματισμοί των ριζών των πολυωνύμων Weber (που ανήκουν τώρα στο F_{p^3}) στις ρίζες των αντίστοιχων πολυωνύμων Hilbert (που ανήκουν στο F_p). Ορίζονται επίσης κάποια νέα πολυώνυμα κλάσεως και μέσω μιας εκτενούς πειραματικής μελέτης συγκρίνεται η χρήση τους στη μέθοδο CM με αυτή των πολυωνύμων Weber, αποδεικνύοντας ότι ανάλογα με τις απαιτήσεις κάθε συστήματος, πρέπει να επιλέγεται διαφορετική κλάση πολυωνύμων. Επιπλέον, αναλύεται η αποδοτικότητα ενός σημαντικού βήματος της μεθόδου χρησιμοποιώντας τέσσερις διαφορετικούς αλγορίθμους και αποδεικνύεται ότι ο αλγόριθμος που προτείνεται στη διδακτορική διατριβή είναι ο δεύτερος καλύτερος ως προς τον χρόνο, αλλά έχει λιγότερες απαιτήσεις χώρου από τον γρηγορότερο. Τέλος, όσον αφορά στον τρίτο στόχο που τέθηκε στα πλαίσια της διδακτορικής διατριβής, παρουσιάζεται η υλοποίηση μιας βιβλιοθήκης λογισμικού που μπορεί να χρησιμοποιηθεί για την ανάπτυξη κρυπτογραφικών συστημάτων ελλειπτικών καμπυλών σε περιβάλλοντα περιορισμένων πόρων. Η βιβλιοθήκη είναι οργανωμένη σε διάφορα, καθαρά διαχωρίσιμα μεταξύ τους τμήματα, έτσι ώστε να μπορεί έυκολα να τροποποιηθεί ανάλογα με τις ανάγκες και τις απαιτήσεις κάθε χρήστη. / Elliptic curve cryptography (ECC) has gained an increasing popularity over the years, as it emerges as a fundamental and efficient technological alternative for building secure public key cryptosystems. This stems from the fact that elliptic curves (ECs) give rise to algebraic structures that offer a number of distinct advantages (smaller key sizes and highest strength per bit) over more customary algebraic structures used in various cryptographic applications (e.g., RSA). These characteristics make ECC suitable for software as well as for hardware implementations. The latter is of particular importance, since (under certain circumstances) it involves devices with limited resources such as cell phones and Smartcards. One of the fundamental issues in ECC is the generation of elliptic curves suitable for use in various cryptographic applications. The most efficient method for generating elliptic curves over prime fields is the {\em Complex Multiplication} (CM) method. This method requires the use of the roots of certain polynomials, called class polynomials. The most commonly used polynomials are the {\em Hilbert} and {\em Weber} ones. The former can be used to generate directly the elliptic curve, but they are characterized by high computational demands. The latter have usually much lower computational requirements, but they do not construct directly the desired elliptic curve. This can be achieved if one provides transformations of their roots to the roots of the corresponding Hilbert polynomials. The goals of this PhD thesis are the following: (i) to improve the CM method by incorporating in it Weber polynomials; (ii) to provide an efficient method for the generation of prime order ECs; and (iii) to develop a flexible and portable software library that will include all the necessary primitives and protocols required for the construction of an elliptic curve cryptosystem, especially in resource limited environments. The current thesis makes a host of new contributions towards the goals set above. In particular, to address the first goal, we present a variant of the CM method that generates elliptic curves of cryptographically strong order. Our variant is based on the computation of Weber polynomials. We present in a simple and unifying manner a complete set of transformations of the roots of a Weber polynomial to the roots of its corresponding Hilbert polynomial for all values of the discriminant. In addition, we prove a theoretical upper bound of the precision required for the computation of Weber polynomials for all values of the discriminant. We present an extensive experimental assessment of the computational efficiency of the Hilbert and Weber polynomials along with their precision requirements for various discriminant values and we compare them with our theoretical bounds. Our experiments show the superiority of Weber polynomials and that the actual precision requirements for the construction of these polynomials are close to the theoretical estimate we provide. To address the second goal, we consider the use of a new variant of the CM method for the construction of {\em prime order} elliptic curves. The Weber polynomials that are used for the construction of prime order elliptic curves have degree three times larger than the degree of their corresponding Hilbert polynomials. We show that, these Weber polynomials do not have roots in the field $\mathbb{F}_p$, but do have roots in the extension field $\mathbb{F}_{p^3}$. We present a set of transformations for mapping roots of Weber polynomials in $\mathbb{F}_{p^3}$ to the roots of their corresponding Hilbert polynomials in $\mathbb{F}_p$. We also show how a new class of polynomials, with degree equal to their corresponding Hilbert counterparts (and hence having roots in $\mathbb{F}_p$), can be used in the CM method to generate prime order elliptic curves. We compare experimentally the efficiency of using this new class against the use of the aforementioned Weber polynomials and show that the type of polynomial that one should use depends on the particular application. We further investigate the time efficiency of the new CM variant under four different implementations of a crucial step of the variant and demonstrate the superiority of two of them. Finally, we present an implementation of an elliptic curve cryptographic library, which includes not only the aforementioned algorithms, but also several cryptographic protocols. We provide a fully-equipped library of portable source code with clearly separated modules that allows for easy development of EC cryptographic protocols, and which can be readily tailored to suit different requirements and user needs. The small size of the library makes it appropriate for use in resource limited devices.

Identiferoai:union.ndltd.org:upatras.gr/oai:nemertes:10889/275
Date25 June 2007
CreatorsΚωνσταντίνου, Ελισάβετ
ContributorsΖαρολιάγκης, Χρήστος, Konstantinou, Elisavet, Γαλλόπουλος, Ευστράτιος, Σταματίου, Ιωάννης, Βραχάτης, Μιχαήλ, Σπυράκης, Παύλος, Γκρίτζαλης, Στέφανος, Κακλαμάνης, Χρήστος, Ζαρολιάγκης, Χρήστος
Source SetsUniversity of Patras
Languagegr
Detected LanguageGreek
RelationΗ ΒΥΠ διαθέτει αντίτυπο της διατριβής σε έντυπη μορφή στο βιβλιοστάσιο διδακτορικών διατριβών που βρίσκεται στο ισόγειο του κτιρίου της.

Page generated in 0.0035 seconds