Back to search

University of Birmingham

The development of fibre-optic acoustic emission sensors for structural health monitoring

Abstract

dc:description.abstract

Acoustic emission (AE) is widely used for condition monitoring of critical components and structures. Conventional AE monitoring techniques use piezo-electric AE sensors to detect elastic stress waves emitted from a source, such as a propagating crack. These sensors are often surface mounted and secured in place using magnetic hold-downs or adhesive tape to monitor structural components. Coupling sensor and structural components is achieved with the use of an appropriate ultrasonic couplant due to the high frequency signals emanating from an AE event (up to 1 MHz). The couplant is crucial to permit an efficient transfer of elastic waves between damage source and sensor. Piezo-electric sensors tend to be relatively bulky, so cannot be embedded into composite materials. The embedding process protects sensors against environmental stresses, prolonging operational lifetime and enhancing device sensitivity. In addition, piezo-electric AE sensors are affected by electromagnetic interference meaning that when required in challenging conditions such as in flammable or explosive environments, AE sensors need to be manufactured as intrinsically safe. Fibre-optic acoustic emission sensors (FOAES) offer several advantages over conventional piezoelectric AE sensors. FOAES can be both surface-mounted to various materials or embedded into composites owing to their small size and acrylate coating relieving the stress concentration around the sensor. The immunity of FOAES to electromagnetic interference makes these sensors attractive for condition monitoring across a wide range of operational environments. This is because the FOAES employs light at the sensing region to interrogate elastic stress waves instead of electrical components used in piezo-electric AE sensors. This study discusses the approach employed for manufacturing sensitive and reproducible FOAES in addition to methods used to characterise them. Towards the end of the investigation, a comparison between AE signals captured using both conventional piezo-electric sensors and FOAES is also provided.

Degree

thesis:*
Name dc:type.qualificationname
d_ph
Level dc:type.qualificationlevel
d_ph
Grantor dc:publisher.institution
University of Birmingham
Year dc:date.issued
2022

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Willberry, James Owen

Subjects

dc:subject × 1

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Dc Identifier Grantnumber
DTA Studentship

Chain of custody

source
Harvested from
University of Birmingham
Base URL
etheses.bham.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Willberry, James Owen. The development of fibre-optic acoustic emission sensors for structural health monitoring. d_ph thesis, University of Birmingham, 2022.