University of Birmingham
The controlled release of reactive diatomic molecules from peri- and peri-like substituted disulfides
Abstract
dc:description.abstractSulfur monoxide has been known for a little over a century. SO has been known to have 3 electronic configurations in which it exists – two of which have been used in organic synthesis. In the last 70 years it has become a useful reagent in organic synthesis displaying a wide range of reactivities with many different functionalities. That being said, only 2 reports confirm singlet SO has been released and captured. These two papers display a large scope of the reactivity of singlet SO but neither display excellent yields that are reported for triplet SO release and capture. The most efficient triplet SO transfer reagent was report by Grainger et al. in 2001 and 2011. This involved the release from peri-substituted trisulfide-2-oxides and capture using a variety of dienes. Therefore, there is still scope for an efficient singlet SO transfer reagent which displays capture of singlet SO. This thesis reports the synthesis, study and controlled release of SO from 4 novel trisulfide-2- oxides (299, 300, 301, and 302). All of the trisulfide-2-oxides were synthesised from the corresponding disulfides (266, 264, 295, and 298) via the reduction of the disulfide (or disulfide/trisulfide mixtures) to the dithiol in yields comparable to previously reported trisulfide-2-oxides (45 – 50 % yield). The dithiol is subject to either SOCl2/pyridine or SO(im)2. SO(im)2 shows a novel method to synthesise trisulfide-2-oxides. All novel trisulfide-2-oxides were crystallised, and the crystallographic data has been compared. The crystallographic data explains how strain within a system can alter the release rate of SO from a trisulfde-2-oxide. [No figure available] Figure 1 Top row - proposed disulfides (naphthalene 107, acenaphthene 266, acenaphthylene 264, fluorene 298, and carbazole 295) Bottom row - proposed trisulfide-2- oxides (naphthalene 105, acenaphthene 299, acenaphthylene 300, fluorene 301, and carbazole 302). Finally, each of the trisulfide-2-oxides have been pyrolysed in the presence of 2,3-dimethyl-1,3-butadiene in chlorobenzene at reflux. None of the novel trisulfide-2-oxides in this study perform better than the previously developed naphthalene trisulfide-2-oxide 105. Similarly, none of the trisulfide-2-oxides in this study performed as well as naphthalene trisulfide-2- oxide under photolysis conditions. However, carbazole trisulfide-2-oxide 302 has shown potential to be a singlet SO transfer reagent, with preliminary results indicating that singlet SO has reacted with cycloheptatriene to form bridged sulfoxide 181 (Scheme 1). [No figure available] Scheme 1 Singlet SO release from carbazole trisulfide-2-oxide 302 to yields disulfide 295 and sulfoxide 181. Carbon monoxide and carbon monosulfide are two reactive diatomic molecules. CO has been shown to have extensive uses in organic synthesis and is an important biological signalling molecule (and has also been shown to be a therapeutic despite its potent toxicity). Carbon monosulfide has very little literature on its uses in synthesis. This could be due to the difficulty generating CS. Naphthalene dithiocarbonate 336 and trithiocarbonate 375 have been synthesised by modified procedures from Ogura et al. These same procedures were used to the synthesise acenaphthene dithiocarbonate 227 and trithiocarbonate 377, acenaphthylene dithiocarbonate 228, 2,7-dimethoxynaphthalene trithiocarbonate 376. All the compounds have been crystallised and their diffraction data analysed, and comparisons between each system have been made. The naphthalene, acenaphthene, and acenaphthylene dithiocarbonates (226, 337, and 338) were subjected to irradiation from a medium pressure Hg lamp – causing photochemical degradation to the corresponding disulfide (107, 266, and 264). [No figure available] Figure 2 Top row - proposed dithiocarboantes (naphthalene 336, acenaphthene 337 and, acenaphthylene 338). Bottom row - proposed trithiocarbonates (naphthalene 375, 2,7- dimethoxy naphthalene 376 and, acenaphthene 377). Naphthalene trithiocarbonate was irradiated using 365nm LED strips in the following solvents; toluene, PhF, PhCl, DMF, CH2Cl2, CHCl3, and THF. Decomposition occurred in THF, but in no others. Morpholine (10 eq) was added and the solvent screen was re-trialled. Decomposition occurred in all solvents. The reactions were repeated but 1,3,5-trimethoxybenzene was added as an NMR standard. Percentage yields of all components in the reaction have been determined via 1H NMR integration.
Degree
thesis:*- Name dc:type.qualificationname
- d_ph
- Level dc:type.qualificationlevel
- d_ph
- Grantor dc:publisher.institution
- University of Birmingham
- Year dc:date.issued
- 2022
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Prior, Connor
- ORCID person:identifier.orcid
Subjects
dc:subject × 1Rights
- Language dc:language.dcterms_iso639_2
- eng