Back to search

University of Birmingham

Numerical and experimental development of an efficient adsorption desalination and cooling system

Abstract

dc:description.abstract

In this Ph.D. thesis, different methods for enhancing the performace of heat powered adsorption system for water desalination and cooling are investigated through numerical and experimental works. These enhancement methods include: (i) optimizing the geometric design of the adsorber bed heat exchangers for both packing or coating with the adsorbent material , (ii) determining the best method of connecting the heat exchanger modules of the adsorber bed and the best vapor gap between them to reduce the mass transfer resistance, (iii) using metal-organic framework (MOF) adsorbent materials namely aluminium fumarate and a newly developed composite zirconium fumarate (MOF-801) / graphene to replace the conventional adsorbent materials, (iv) reducing the dead volume in the condenser and evaporator chambers to enhance the compactness of the adsorption system and (v) integrating the adsorption system with different desalination technology to increase the water recovery, and reduce the specific energy consumption. After optimizing the geometrical design of the heat exchanger in the adsorber bed, a comparative study between a packed rectangular-finned tube and a coated wire-finned tube is conducted. Results showed that the coated wire-finned tube enhanced the adsorption system specific daily water production (SDWP) and specific cooling power (SCP) by 82% compared to the packed rectangular finned tube, while it lowered the system coefficient of performance (COP) by 52%. In terms of the specific volumetric daily water production (SVDWP), the adsorption system with coated wire-finned adsorber beds has SVDWP lower than the system with packed one by 21%. Integrating the adsorption system with a Batch Reverse Osmosis (BRO) desalination system using packed rectangular-finned tube adsorption system and a wide range of water salinity, it is found that the water recovery can be increased to 96.9% and 65.3% when brackish water and seawater are fed to the hybrid system respectively. Finally, using a newly developed composite zirconium MOF (MOF-801) material with graphene nanoplatelets enhanced the SDWP and SCP by 40% due to its higher thermal conductivity and faster kinetics compared to the neat MOF.

Degree

thesis:*
Name dc:type.qualificationname
d_ph
Level dc:type.qualificationlevel
d_ph
Grantor dc:publisher.institution
University of Birmingham
Year dc:date.issued
2022

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Albaik, Ibrahim A. A.
ORCID person:identifier.orcid

Subjects

dc:subject × 1

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Dc Identifier Grantnumber
Low Grade Waste-to-Energy Conversion for Electricity, Water Desalination and Cooling using Gasification, MOF Adsorption and Reverse Osmosis in the Kingdom of Saudi Arabia, Research and Development Office, Ministry of Education, Saudi Arabia.
Solar Driven Water Treatment System using MOF Adsorption Integrated with Pre-treatment and Real Time Water Quality Sensor for Egypt’. Newton-Musharafa Institutional Link Fund,in collaboration with Egypt-Japan University of Science and Technology.
Development of Solar Driven Adsorption Water Desalination/Cooling System Using Advanced Metal Organic Framework Material. funded by Qatar National Research Foundation.
Development of heat driven adsorption desalination – cooling system using advanced metal Organic Framework Materials (MOFs), British Council Newton Fund, Institutional Link with Alexandria University

Chain of custody

source
Harvested from
University of Birmingham
Base URL
etheses.bham.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Albaik, Ibrahim A. A.. Numerical and experimental development of an efficient adsorption desalination and cooling system. d_ph thesis, University of Birmingham, 2022.