Back to search

University of Birmingham

The application of active control in railway pantographs

Abstract

dc:description.abstract

Pantographs are essential elements of modern electric trains, coupling the train to the overhead electric lines in order to deliver a continuous supply of electrical energy to the vehicle. Undesired contact can cause excessive wear and poor train operation performance. In the worst case, this can eventually lead to dewirement incidents that can damage both the train and the overhead lines. Pantographs in operation today, are essentially passive devices. However, active pantograph design has the potential to significantly improve the robustness of the pantograph–catenary interaction, in order to deliver a continuous power transmission for electric trains. However, it is found that the model-based controllers of current active pantograph research are not properly validated, whereas those that are tested in the laboratory are not designed based on the model. This thesis proposes a new and complete design and test approach for active pantographs following the typical model-based control design process. A validated pantograph–catenary model and simulation framework are first developed, based on which a new (real-time-capable) disturbance-observer-based catenary model is proposed to improve the accuracy of active pantograph validation in simulation. It is advised that the proposed model should replace the classic time-varying lumped-mass catenary model in active pantograph validation. A variety of control laws, ranging from the classic control methods to the state-of-the-art sliding mode control, are applied to the active pantograph design. The goal of designing a closed-loop pantograph system is to control the contact force by providing the measured contact force (i.e., output feedback), so as to make the contact force closer to the desired magnitude and thus reduce fluctuations. The active pantographs designed based on the linearised pantograph–catenary model have been demonstrated to be effective in reducing contact force fluctuation when validating with accurate catenary models. Through the model-based active pantograph design approach, a novel frame-actuated active pantograph prototype (controlled by pneumatic pressure) is designed and tested with a hardware-in-the-loop experiment. The designed active pantograph in the laboratory can reduce the contact force fluctuation as expected at the design and simulation stages. It is recommended that more refined modelling approaches would be beneficial in delivering better control performance in the active pantograph.

Degree

thesis:*
Name dc:type.qualificationname
d_ph
Level dc:type.qualificationlevel
d_ph
Grantor dc:publisher.institution
University of Birmingham
Year dc:date.issued
2023

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Duan, Huayu
ORCID person:identifier.orcid

Subjects

dc:subject × 3

Rights

Language dc:language.dcterms_iso639_2
eng

Chain of custody

source
Harvested from
University of Birmingham
Base URL
etheses.bham.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Duan, Huayu. The application of active control in railway pantographs. d_ph thesis, University of Birmingham, 2023.