Back to search

University of Birmingham

Leaky wave antennas for remote vital signs monitoring at MM-wave frequencies

Abstract

dc:description.abstract

In this thesis, a novel leaky wave antennas (LWAs) of the Fabry-Perot type (FP) with significantly improved gain and beam scanning capabilities based on periodic metasurfaces for remote vital sign monitoring (RVSM) in the millimetre waveband (50 – 68 GHz) are presented. The LWA design technique presented overcomes the difficulties associated with the fabrication and implementation of traditional designs for millimetre-wave antennas. This technique uses a simple feed between a partially reflective surface (PRS) and a high impedance surface (HIS) to achieve a leaky wave and beam scanning effect for RVSM. Periodic arrays, also known as frequency selective surfaces (FSS) due to their filtering capabilities, were used to determine partial reflections. First, a theoretical approximate model was used to gain an understanding of the physical behaviour of the antenna. The reflection characteristics of PRS and HIS determined using plane wave modal analysis were related to the performance of the antenna. The findings of this study served as guidelines for the development of single and double-layer array designs optimised for both high gain and beam scanning performance. An experimental study on RVSM was conducted using the proposed LWAs and compared with a conventional contact device to verify the accuracy of the results. It was found that the proposed LWAs can detect heart rate and breathing rate with 93% accuracy, which is a good match with the contact device. This research work has contributed to the current knowledge on (i) the design and testing of LWAs with and without HIS configuration to achieve high gains of 20 dBi and 22 dBi for short (1 m) and long (2 m) distances RVSM, (ii) the design of multilayer LWAs with improved bandwidth (8 GHz) and higher gain (24 dBi) for RVSM at 4 m, and (iii) the design and testing of bidirectional LWAs based on dielectric image lines with a gain of 19 dBi and 70o beam scanning through the broadside for single and multiple target RVSM at 1.5 m. The above contributions and findings of the proposed LWAs for RVSM have been published.

Degree

thesis:*
Name dc:type.qualificationname
d_ph
Level dc:type.qualificationlevel
d_ph
Grantor dc:publisher.institution
University of Birmingham
Year dc:date.issued
2023

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Mingle, Solomon
ORCID person:identifier.orcid

Subjects

dc:subject × 1

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Dc Identifier Grantnumber
Multi-Layer Beam Scanning Leaky Wave Antenna for Remote Vital Signs Detection at 60 GHz
Bidirectional Leaky-Wave Antenna Based on Dielectric Image Line for Remote Vital Sign Detection at mm-Wave Frequencies
Beam-Scanning Leaky-Wave Antenna Based on Dielectric Image-Line for Millimetre-Wave Applications
A Fabry-Pérot Multilayer High Gain Frequency Scanning Antenna at 60GHz
Enhancing Frequency-Scanning Leaky-Wave Antenna Design Base-metamaterial for Millimeter-wave application
Frequency Scannable Leaky-Wave Antenna Design for Remote Vital Signs Radar Application at 60GHz Band
Beam-Steering in Metamaterials Enhancing Gain of Patch Array Antenna Using Phase Shifters for 5G Application
A Novel Design and Analysis of C-Shaped Thickness of Metamaterial for Multi-Band Microwave Applications

Chain of custody

source
Harvested from
University of Birmingham
Base URL
etheses.bham.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Mingle, Solomon. Leaky wave antennas for remote vital signs monitoring at MM-wave frequencies. d_ph thesis, University of Birmingham, 2023.