Back to search

University of Birmingham

Developing additive manufacturing methodology towards the in situ repair of articular cartilage defects

Abstract

dc:description.abstract

In situ additive manufacturing as a next step in the development of technologies towards repair of articular cartilage defects to treat a younger, more active population, and to delay full knee replacement. The main steps in the in situ AM workflow are explored in depth to investigate best-practice and technologies available for development. This thesis covers 3D optical scanning, alignment of conformal prints, toolpath development for in situ additive manufacture of surface additions and filling of surface defects, and in situ additive manufacture of PLA constructs onto ’known’ and ’unknown’ surfaces. Investigation of the 3D scanning parameters presents lighter coloured objects as more accurately captured (compared to darker objects) by the EinScan-SP 3D scanner. The optimum print parameters for dimensional accuracy for additive manufacture of thermally bonded polylactic acid were 40 mm/s print speed and 200 °C. For scan dimensional accuracy, a print speed between 30 and 60 mm/s, and print temperature of 200 °C produced maximum dimension deviations of 0.2 mm. A series of surfaces successfully underwent in situ conformal additive manufacture on the top surface, or the base of a surface defect. First, basic cuboids previously 3D printed, with varying complexity of top surface geometry. Next, clay approximations of the radius of curvature of human knee articular surfaces. Finally, an "unknown" surface (Sawbone bone model). In conclusion, this thesis provides in depth proof-of-concept for the development of a technique for additive manufacturing in situ for conformal additive manufacturing onto ’unknown’ surfaces

Degree

thesis:*
Name dc:type.qualificationname
d_ph
Level dc:type.qualificationlevel
d_ph
Grantor dc:publisher.institution
University of Birmingham
Year dc:date.issued
2024

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Mummery, Ailsa Paige
ORCID person:identifier.orcid

Subjects

dc:subject × 2

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Dc Identifier Grantnumber
EP/R513167/1

Chain of custody

source
Harvested from
University of Birmingham
Base URL
etheses.bham.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Mummery, Ailsa Paige. Developing additive manufacturing methodology towards the in situ repair of articular cartilage defects. d_ph thesis, University of Birmingham, 2024.