Back to search

University of Birmingham

On improving the cost-effective dispersion of calcium carbonate in polypropylene for impact resistance

Abstract

dc:description.abstract

The potential to improve the performance of polymer composites cost-effectively has been researched across various aspects of development and manufacture. Each endeavour fell broadly into one of three categories; the principal ingredients and their required properties, the methods with which they were transformed into products and the means by which they were observed. It was determined that the ingredients with the highest potential as defined, each shared simplicity and abundance as material traits. The use of bespoke functionalised ingredients proved costly to implement, providing only modest property benefits compared to a standard formulation comprising polypropylene, 10 – 30 % w/w of 2 μm calcium carbonate with 0.5 – 1.0 % w/w stearic acid surface treatment. It was found that an apparent deterioration in impact resistance that was encountered on reducing the filler particle size was in each case observed, attributable to a coarsening of these fine particles that resulted from the mixing process. Finer particles could not be implemented more cost-effectively than standard formulations; an effect which was attributed to the tendency of the finest particles to form aggregates that could not be decomposed by mixing under high shear. However, the favourability of particle dispersion in standard formulations was used to implement a production method of polymer composites that required significantly less energy across the entire production stage and held other significant advantages. Concentrates comprising minerals in wax were produced and made to successfully re-disperse from loadings approaching those allowed by their theoretical packing maxima, in some cases up to 90 % w/w. Furthermore, a single injection moulding cycle with minimal back-mixing was used to combine concentrates and neat polymers to make commercially-competitive composite specimens, at final concentrations as low as 10 % w/w. A principal method to obtain in situ visual particle data from thin composite films was developed along with several derivative analyses. The techniques allowed rapid and representative data collection for high particle proportions at resolutions of 6 – 8 μm, accounting for particles most relevant to impact-resistance in standard formulations. As a whole, significant and realistic saving opportunities were identified in the expenditure of unnecessary resources, such as; processing energy, capital investment, transportation, labour and time. These findings were supported by experimental data.

Degree

thesis:*
Name dc:type.qualificationname
d_en
Level dc:type.qualificationlevel
d_en
Grantor dc:publisher.institution
University of Birmingham
Year dc:date.issued
2011

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Jones, Paul Glyn

Subjects

dc:subject × 1

Rights

Language dc:language.dcterms_iso639_2
eng

Chain of custody

source
Harvested from
University of Birmingham
Base URL
etheses.bham.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Jones, Paul Glyn. On improving the cost-effective dispersion of calcium carbonate in polypropylene for impact resistance. d_en thesis, University of Birmingham, 2011.