Back to search

University of Birmingham

Electro-mechanical behaviour of indium tin oxide coated polymer substrates for flexible electronics

Abstract

dc:description.abstract

Highly conductive (3.0 - 5.0 x 10 -4 \( \Omega\) cm) and transparent (80 – 85% ) ITO films were successfully fabricated on glass and polymer substrates (PET, PEN and PC) by pulsed laser deposition at low temperatures (24 – 150 °C). The influence of deposition conditions on the structural and physical properties of ITO-coated glass substrates was studied. The samples were investigated using Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), X-Ray Diffraction (XRD), the fourpoint probe and a spectrophotometer. Sol-gel derived ITO films dip-coated on glass substrates were also studied. The optimum film obtained at a firing temperature of 600 °C had a resistivity of 1.8 x 10 -2 \( \Omega\) cm, and optical transmittance of 80%. The electro-mechanical behaviour of ITO/polymer systems was investigated under uniaxial tension and controlled buckling in tension and compression. The resistance changes were monitored in situ. Cracking and buckling delamination failure modes were observed for all samples investigated at critical strains raging from 2.8 to 3.4%, and from 7.0 to 8.0%, respectively. The results showed that the dominant critical failure mode depends on the applied stress conditions. The ITO/PEN samples showed high flexibility; the samples were buckled in tension down to a 2.6 mm radius of curvature before cracks start to occur.

Degree

thesis:*
Name dc:type.qualificationname
d_ph
Level dc:type.qualificationlevel
d_ph
Grantor dc:publisher.institution
University of Birmingham
Year dc:date.issued
2012

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Potoczny, Grzegorz A.

Subjects

dc:subject × 3

Rights

Language dc:language.dcterms_iso639_2
eng

Chain of custody

source
Harvested from
University of Birmingham
Base URL
etheses.bham.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Potoczny, Grzegorz A.. Electro-mechanical behaviour of indium tin oxide coated polymer substrates for flexible electronics. d_ph thesis, University of Birmingham, 2012.