Back to search

University of Birmingham

Measurement of applied force to dislodge orthodontic temporary anchorage devices

Abstract

dc:description.abstract

Aims: To measure the force required to dislodge three different orthodontic temporary anchorage devices (TADs) from artificial test blocks and to investigate whether varying the cortical thickness of the test block will affect these forces. Materials and Method: The TADs were embedded into test blocks consisting of polyurethane foam, laminated with either 2mm or 3mm short-fibre-filled epoxy sheets and a horizontal dislodging force applied, using an Instron universal testing machine. The maximum force applied before the TAD was fully dislodged was recorded. Three TADs were tested: InfinitasTM, Ancor ProTM and Ortho ImplantTM. 150 of each design were tested in the 2mm thickness test block and a further 150 of each were tested in the 3mm thickness test block. Results: The mean force required was 468N in the 2mm test blocks and 567N in the 3mm test blocks. No significant difference was observed between the InfinitasTM and Ancor ProTM TADs, however there was a significant difference (P>0.05) between both of these TADs and the Ortho ImplantTM. The force required in the 3mm test blocks was significantly higher than the force required in the 2mm test blocks. Conclusion: All of the TADs were functionally acceptable, in terms of resistance to dislodgement forces. The Ortho ImplantTM required a significantly higher force to be dislodged from both the 2mm and 3mm test blocks. The thickness of the test block had a significant effect on the force required to dislodge each of the TADs.

Degree

thesis:*
Name dc:type.qualificationname
m_ph
Level dc:type.qualificationlevel
m_ph
Grantor dc:publisher.institution
University of Birmingham
Year dc:date.issued
2012

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Scannell, John

Subjects

dc:subject × 2

Rights

Language dc:language.dcterms_iso639_2
eng

Chain of custody

source
Harvested from
University of Birmingham
Base URL
etheses.bham.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Scannell, John. Measurement of applied force to dislodge orthodontic temporary anchorage devices. m_ph thesis, University of Birmingham, 2012.