Back to search

University of Birmingham

Environmentally friendly pultrusion

Abstract

dc:description.abstract

This thesis reports on an environmentally-friendly pultrusion technique for the production of fibre-reinforced composites, termed as “clean pultrusion”. In this new manufacturing technique, the resin bath used in the conventional pultrusion was replaced with a custom-built resin impregnator. The resin impregnator was designed and built to impregnate the rovings using a combination of pin, injection and capillary-based impregnation. An integral aspect of the clean pultrusion process was spreading of the filaments in the rovings, via mechanical means, prior to impregnation. An automated fibre spreading rig was designed and built based on “tension-release” process. The rig-design was optimised using Taguchi method. The physical, mechanical and thermo-mechanical properties of the composites pultruded using the clean and conventional techniques were compared. It was found that the composites manufactured using the clean pultrusion exhibited lower void and better mechanical properties. A life cycle assessment (LCA) was also performed to compare the environmental impact of the clean and conventional pultrusion processes. The LCA demonstrated conclusively that the clean pultrusion technique offers several environmental advantages over the conventional resin-bath pultrusion. The new pultrusion technique was demonstrated as being a viable method to pultrude composites without using a resin bath.

Degree

thesis:*
Name dc:type.qualificationname
d_ph
Level dc:type.qualificationlevel
d_ph
Grantor dc:publisher.institution
University of Birmingham
Year dc:date.issued
2013

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Irfan, Muhammad Shafiq

Subjects

dc:subject × 2

Rights

Language dc:language.dcterms_iso639_2
eng

Chain of custody

source
Harvested from
University of Birmingham
Base URL
etheses.bham.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Irfan, Muhammad Shafiq. Environmentally friendly pultrusion. d_ph thesis, University of Birmingham, 2013.