Abstract
dc:description.abstractThe microstructure evolution of a sand cast AZ91 magnesium alloy during heat treatment (solution treatment and subsequent ageing) were characterized quantitatively using a combination of optical microscopy (OM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The area fraction of discontinuous precipitates and number density of continuous precipitates (NV) in the AZ91 alloys with and without pre-deformation were measured using OM and TEM, respectively. Based on these metallurgical evidences, the existing precipitation strengthening mode for AZ91 was modified and the effect of pre-deformation on the precipitation strengthening of AZ91 was investigated. Al-Mn-(Mg) particles in the size range of 20-200 nm have been found in the as-cast AZ91. Their morphologies, chemical composition and structures were investigated using TEM. It was found that these particles have a chemical composition of (Al 6.52Mn) 1-xMgx (x < 0.13) and a decagonal quasi-crystalline structure. These particles were stable during a solution treatment and acted as preferential nucleation sites for continuous Mg17Al12 precipitates during the subsequent ageing. The results obtained using two electron tomography (ET) approaches were also summarized in this thesis. One uses HAADF-STEM for Mg17Al12 precipitates on Al-Mn-(Mg) particles. The other technique is BF-STEM applied to study Mg17Al12 precipitates on the dislocations.
Degree
thesis:*- Name dc:type.qualificationname
- d_ph
- Level dc:type.qualificationlevel
- d_ph
- Grantor dc:publisher.institution
- University of Birmingham
- Year dc:date.issued
- 2013
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Zeng, Ruilin
Subjects
dc:subject × 1Rights
- Language dc:language.dcterms_iso639_2
- eng