Back to search

University of Birmingham

Drilling of Ti/CFRP/A1 multilayer stack materials

Abstract

dc:description.abstract

Multilayer metallic/composite stacks are increasingly being used in wing and tail plane sections of modern commercial aircraft, with component assembly primarily through mechanical joining, hence the requirement for fixation holes. Currently, the individual material sections (titanium, aluminium and CFRP) are machined independently prior to assembly however; there is growing demand within the industry to produce holes through the stack in a single operation. The research detailed in the thesis involves evaluating the effect of operating parameters, drill geometry, tool materials/coatings and cutting strategy when single shot drilling three-layer Ti/CFRP/Al stacks. Performance was assessed against various process measures including thrust forces/torque, hole accuracy/quality, tool wear/life, burr formation and hole surface integrity (microhardness and microstructure). Statistical design of experiments and associated analysis techniques (main effects plots, ANOVA etc.) were employed to identify the significance of variable factors and preferred operating levels with respect to different responses. Based on the experimental results, a bespoke drill design was formulated, which was validated against current commercially available drills recommended for the drilling of multilayer stacks. Finally, the influence of cutting fluid pressure on temperature and hole quality was investigated.

Degree

thesis:*
Name dc:type.qualificationname
d_ph
Level dc:type.qualificationlevel
d_ph
Grantor dc:publisher.institution
University of Birmingham
Year dc:date.issued
2014

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Kuo, Chun-Liang

Subjects

dc:subject × 1

Rights

Language dc:language.dcterms_iso639_2
eng

Chain of custody

source
Harvested from
University of Birmingham
Base URL
etheses.bham.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Kuo, Chun-Liang. Drilling of Ti/CFRP/A1 multilayer stack materials. d_ph thesis, University of Birmingham, 2014.