Back to search

University of Birmingham

Vibrational energy harvesting using piezoelectric ceramics and free-standing thick-film structures

Abstract

dc:description.abstract

This thesis presents a series of broad but systematic and consecutive investigations on the topic of piezoelectric energy harvesting. These include material fabrication and characterisation, harvester fabrication and material parameter selection, electric output and dynamic behaviour tests of energy harvesters, and the feasibility of utilising lead-free piezoelectric materials for energy harvesting. Three lead-based and one lead-free perovskite solid-solutions compositions have been researched individually and compared to each other. In the form of bulk ceramics the lead-free composition is considered capable of replacing the lead-based compositions for vibrational energy harvesting at room temperature. Typical properties of εr≈4700, \(P\)r≈9 μC/cm2, \(d\)33≈500 pC/N, \(k\)p≈0.51 have been achieved for the lead-free and lead-based compositions respectively. Vibrational energy harvesting based on a novel structure of piezoelectric/silver multi-layer free-standing thick-film unimorph and bimorph cantilevers have been investigated using two of the lead-based compositions. A planar shrinkage difference of 3-6% between the silver and piezoelectric layers is suggested in order to ensure successful fabrication. When tested under harmonic vibration conditions, a comparison of unimorph individual harvesters suggests that higher piezoelectric voltage and electromechanical coupling coefficients may be preferred when selecting materials. Further optimisations involving bimorph devices with tip proof mass have demonstrated maximum harvester outputs (root mean square) of about 9 μW and 2.8 V with approximately 14% bandwidth under resonant vibrations (I 00-150 Hz, 0.5 - I.Og). In addition, the cantilevers have utilised to harvest wind energy with a modified spinning configuration, exhibiting 3.4 V average open-circuit output voltage in optimum wind conditions.

Degree

thesis:*
Name dc:type.qualificationname
d_ph
Level dc:type.qualificationlevel
d_ph
Grantor dc:publisher.institution
University of Birmingham
Year dc:date.issued
2015

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Bai, Yang

Subjects

dc:subject × 2

Rights

Language dc:language.dcterms_iso639_2
eng

Chain of custody

source
Harvested from
University of Birmingham
Base URL
etheses.bham.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Bai, Yang. Vibrational energy harvesting using piezoelectric ceramics and free-standing thick-film structures. d_ph thesis, University of Birmingham, 2015.