Back to search

University of Birmingham

Characterisation of aluminium armour alloy AA7017-T651

Abstract

dc:description.abstract

High strength 7xxx series Al-Zn-Mg-Cu alloys are widely used in the aerospace Industry due to their high strength to weight ratios. The high yield strength of alloys such as AA7075 or AA7074 is achieved through precipitation hardening, the highest of which can be in excess of 600MPa and are achieved through the addition of Cu. There is however a medium strength group of alloys in the 7xxx series which are characterised by their low copper levels maintained below 0.3wt% in order to prevent liquation cracking and hence allow them to be welded. These medium strength Al-Zn-Mg(-Cu) alloys are mostly found in light weight armoured vehicles due to their weldability, low density and good ballistic performance. There is however very little published on the corrosion characteristics of these alloys and the little that exists is confined to studies of stress corrosion cracking (SCC) and weld fatigue. This work will attempt to understand the general corrosion characteristics of this alloy under free corrosion conditions and to establish in the literature the microstructure, particularly with regard the nature of the coarse intermetallics.

Degree

thesis:*
Name dc:type.qualificationname
m_rs
Level dc:type.qualificationlevel
m_rs
Grantor dc:publisher.institution
University of Birmingham
Year dc:date.issued
2015

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Shapcott, Stephen

Subjects

dc:subject × 1

Rights

Language dc:language.dcterms_iso639_2
eng

Chain of custody

source
Harvested from
University of Birmingham
Base URL
etheses.bham.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Shapcott, Stephen. Characterisation of aluminium armour alloy AA7017-T651. m_rs thesis, University of Birmingham, 2015.